i just purchased a omni 4 bar and was wonderin if you any of you guys are running them and does it read fine on the dataloging

 

if you can get the aem 5 bar map sensor . I went through 3 different omni power 4 bar sensors and they were all bad. I had to retune my car just because of the map sensor.

 

What EMS were you using? I use those sensors all the time with no problems..

 

I would think you would have to retune your car when you put a different map sensor on there.

I was thinking of buying one of these also.

 

i had an issue with one. the car i was tuning made 700 horsepower at 25psi one pull and the next pull it made 720 horsepower at "12psi" lol

took the sensor off, put on another of the same sensor and everything was fine. i think they changed glues or something at a later date? its a different color at least.

since then, ive used 20-30 of them with no problems. cant beat how simple and clean the install is.

 

ya im goin to be using it for ectune...i just dont want it to read wrong on the computer when tuning

 

I've used the same one on 2 setups now with no issues. It's a nifty little piece. You'll be fine.

 

You won't have a problem. We are an authorized eCtune dealer & it works perfectly.
We have sold tons of hondata/omni 4 bar map sensors without issues!

 

I bought one from ^ and it works perfect for 7,000 miles now at 12psi

 

I have one as well, works great so far and cant beat the direct plug n play replacement design.

 

no issues with mine

 

^ thanks guys

 

no issues with mine and no cutting wires.

 

+1

 

I've ran one all year long. I've run as much as 35psi without a problem.