I've had my dash out and have put it back in connected everything up only to fin I have no indicators. I Used a voltmeter to see if there was power from the three green wires on the column switch but there is no voltage there. Hazard lights work fine. Im stumped! Anyone think they know what the problem is?

 

Obviously, in the process of disassemble and reassemble the dash, you accidentally disconnected or damaged the indicator wiring. Just trace those three lines back to the source. In this case, a Helms service manual is your best friend.

 

I forgot to mention that there is no power at the same wires in the hazard switch either. Would that make any sense to anybody, I've checked for damage and all seems fine!
Any one have maybe a wiring diagram they could stick up?

 

F.U.C.K.ing BUMP!!!!!