I'm putting my swap together and I was hooking the shifter up to the linkage and the shifter is to narrow between the two pieces of the shift linkage...is there supposed to be a bushing between the shifter and the linkage? Its enough of a gap for a couple washers on both sides! The shifter is a d-series...are b-series wider? Or pics would be helpful too!
Thanks in advance!

 

you need a b-series shift linkage for a b-series swap or h2b swap




Modified by LA_HONDAS at 9:46 AM 10/19/2008

 

yes theyre are supposed to be spacers there. just put in some washers to fill the gap, but don't tighten that bolt too much or you will have a difficult time moving your shifter.

 

I do have b series linkages....

Swipe'd..thats exactly the info I was lookin for!
Thaks for the help!!!!!