ek b series vtec wiring confusion
10-19-2008, 10:28 AM
#1
Junior Member
Thread Starter
Join Date: Oct 2006
Location: Fort Worth, Tx, US
Posts: 384
Likes: 0
Received 0 Likes
on
0 Posts
ek b series vtec wiring confusion
im trying to wire up vtec using my stock dx harness but im confused.
im using this as my sourse of info:http://www.ff-squad.com/tech/w...8.jpg it says c15 is for the vtec pressure switch but the pressure swith has two wires that go to it. so where does the other one go? it only makes sense to me for it to be grounded but if so can i ground it anywhere or does it go somewhere specific?
im using this as my sourse of info:http://www.ff-squad.com/tech/w...8.jpg it says c15 is for the vtec pressure switch but the pressure swith has two wires that go to it. so where does the other one go? it only makes sense to me for it to be grounded but if so can i ground it anywhere or does it go somewhere specific?
10-19-2008, 03:07 PM
#2
Junior Member
Join Date: May 2007
Location: Louisville, KY, USA
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
10-19-2008, 06:09 PM
#3
Honda-Tech Member
Join Date: Apr 2008
Posts: 854
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Rob_O)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Rob_O »</TD></TR><TR><TD CLASS="quote">FAQ is your friend</TD></TR></TABLE>
Thread
Thread Starter
Forum
Replies
Last Post
