hey guys i have a 91 crx with a jdm b16 in it i just put a new relay in it the old one was not working all the time but not i thing im just running to much fuel i am going to get a fule pressure gauge and check it but what dose the pressure need to be

 

something like 35psi with the vacuum hose on the regulator, and 40-50psi with it off.

 

hey do you happen to know what a D16A6 fuel pressure should be at?

 

its the same

 

I know the fuel regulators are different for an HF and an SI, do you know what the HF regulator runs. My engine running lean just trying to figure some stuff out

 

alldata says its the same

 

cool, thanks for the input. I called the parts store to check if the regulators had the same part #, and they said know so I assumed they ran different pressure. Guess thats what I get for assuming. Just installed a B&M pressure gauge on my new fuel filter and I'm running about 30 psi. Think this could be the cause of my car running lean.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 88crxpain &raquo;</TD></TR><TR><TD CLASS="quote">cool, thanks for the input. I called the parts store to check if the regulators had the same part #, and they said know so I assumed they ran different pressure. Guess thats what I get for assuming. Just installed a B&M pressure gauge on my new fuel filter and I'm running about 30 psi. Think this could be the cause of my car running lean.</TD></TR></TABLE>

how do u know ur running Lean????