I’ve decided to go turbo with my first engine build off (b16a). I would like to know which is a reputable shop to have the engine sleeved, and what would be an idea bore to go with. I would like to get a little more displacement with out loosing a lot of need cylinder wall for strength.

 

Witha B16a core,ERL (ERLperformance.com) does great work.


check out their site for pics and vids.......


we can set you up with a block if needed............


#1 dealerin Florida....just an FYI.....lol

 

sorry maybe i should have said shops in So.Cal I would be willing to drop the block off, than to ship it out

 

check out golden eagle. I very happy with them.
http://goldeneaglemfg.com/

 

We work with Drag Cartel out in Southern Cali. They can take care of the shipping to us.

 

GoldenEagle,ERL,Benson...really dont matter who you go to they all do very good work...i would go with a 83mm bore

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hotrod99 &raquo;</TD></TR><TR><TD CLASS="quote">GoldenEagle,ERL,Benson...really dont matter who you go to they all do very good work... </TD></TR></TABLE>

I run Golden Eagle, but thats not saying that I wouldnt run a Benson or ERL block. Either of them are good.
Dart blocks are overpriced!

 

Benson for me , Dan did my last 3 blocks and I never had a problem.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Desir Performance &raquo;</TD></TR><TR><TD CLASS="quote">Benson for me , Dan did my last 3 blocks and I never had a problem.</TD></TR></TABLE> Laskey Racing

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Garcia-Racing &raquo;</TD></TR><TR><TD CLASS="quote"> Laskey Racing</TD></TR></TABLE>

 

AEBS did mine...took 2 freaking months...but did a great job

 

your in SD and you don't want to deal with shipping... you have many options. take it to pann auto to have AEBS do it. there in SD, or you can take it to Darton in carlsbad, or you can drive up to san dimas (riverside) and take it to GE. those were my choices when I was in your boat and didn't want to deal with shipping. whichever you choose you'll be happy.

 

Golden Eagle ! every block we have ever gotten from them, has been good. never any problems with any of their blocks. i cannot say the same for other sleeve installers blocks ive seen over the past years.....

 

i don't know if i'd trust pann holding your dick and some bum pushing with a 10ft pole. I've always disliked pann's shady acts. But thanks for the info. Looks like i will be dropping the block off at eagle, the next time i visit my buddy up in LA.

 

I Don't trust a single shop in SD. what a shame.....crapmatic enginuity(ha's brokeback mountain jt motorsports), Pann auto/green light automotives backyard certified mechanics, Joey's shady a$$(Big Kid), and then you have group5let's tack on an extra $200 motorsports, ARD performance(oh yeah they don't even exist anymore), HSR(who are they fooling? I went in there to ask them if they could get pauter rods, and they were asking why I wanted to get my rods powder coated...Joke!!)......lol the list goes on. I just go to L.A. that's why san diego doesn't exist to the rest of C.A. My bad man, just venting, you should go wtih GE. there really good. talk with Tom @ camp1320. he has good pricing.

 

word!

 

Any of Golden Eagle, Benson's - via Laskey racing or Darton - via ERL. All great with product and installation. I'd go with 84.mm

 

i would contact a site sponser exospeed if youre wanting to get sleeved. they are in cali.

http://exospeed.com/

contact Wil (ExospeedAMcrx on here)
https://honda-tech.com/zero...05355

just look at how long exospeed has been around, that should tell you everything you need to know

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wrx-killer-Sti-eater &raquo;</TD></TR><TR><TD CLASS="quote">check out golden eagle. I very happy with them.
http://goldeneaglemfg.com/</TD></TR></TABLE>