Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD
1) This is for Race Car parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and I will delete it.
3) you are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, all your posts in the FS sticky will be deleted

4) NO WTB ADS!

5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE

We will delete any BS we feel does not belong in here

 

set of new weld magnums, have yet to makea pass on these, were used to check fitment, and move car around shop

powdercoated black-nice smooth low gloss finish

fronts--15x10 5" backspacing 26x10x15 mt et drag
rears-- 15x3.5 ? backspace 24x4x1 mt et front





-----------------------------------------------------------------------------------------------
PWR water to air intercooler--this is the biggest they sell, 8x10 core-22" overall 1550 cfm flow rate, supports up to 1500hp (retails for $1500)

will include cell for ice chest (jazz4 gal stand up) lines/fittings -10 AN, pump (purchased a big guy from an RV store) all mounting brackets




-------------------------------------------------------------------------------------------------
brand new turbonetics T76HO T4 exhaust .81ar F1 turbine wheel turbo-never used, retails for $1800+ at most places looking to get $1500




i want this stuff gone--taking reasonable offers

call me for prices, or to make an offer(flexible) if you're interested 774-319-9072


Modified by boostedSR20_4U2NV at 10:36 PM 6/5/2008


Modified by boostedSR20_4U2NV at 11:13 AM 6/10/2008


Modified by boostedSR20_4U2NV at 8:58 PM 6/11/2008

 

DSS Axles 3.9 SOLD
CC Twin Disc Clutch $800
JG GSR manifold SOLD
BLOX 76mm TB SOLD
Type R cams and STR cam gears $400
GSR Tranny with Type R LSD $800
Jim Fab Traciton Bars $200
Full Race T4 Ram horn manifold with 4'' downpipe SOLD
46mm Tial wastegate $300 (1Bar Spring)
Lenso's Black with studs and 24.5x9x13 M/T $500



Everything for a B-Series

Hit me up...914 557 9048
Paypal Syblue01@aol.com


Modified by WHTZ at 7:21 PM 6/2/2008

 

F.S H22 Manifold and Downpipe.
The downpipe is flanged for a V band housing turbo, 3" and heat wrapped.
asking $650 for the setup together.

Greg
GO-AUTOWORKS.COM

Feel free to call, pm or email any questions











Modified by Autoworks at 7:03 AM 6/1/2008

 

(1) Full-Race/Hypertune 3" throttle body - $425

(1) Borg-Warner S378 turbo *never used

1600cc fuel injectors *never used - $300


Powertrain Control Solutions Dashlogger - $750


(2) 15x9 Welds w/28" M/T tires on them *~5 passes on them- $775




Hallman manual boost controller - $60


Shipping and PayPal fees (if applicable) not included. Prices are all or best offer.


Modified by Axle at 12:20 PM 6/1/2008

 

acell dfi gen 7 with honda harness 600$ world racing pbc-1300$


Modified by matt k at 11:51 PM 6/15/2008

 

GSR Quaife LSD for sale or trade for B16/LS Quaife. $700 shipped.
Used in perfect shape, out of stock everywhere!

 

FS: Catch Pan 30"x35" - $250 shipped
2 " deep, dropps to 3" deep in center.

 

***SOLD***
Precision 1000cc Peak and Hold Injectors

Less than 150miles on these.

$255 shipped
***SOLD***


Modified by SynTeg at 10:51 AM 6/9/2008

 

Sc6162 turbo. brand new. ported S housing Vband exhaust housing.

$750

 

JG GSR Intake manifold bored out to 70mm. Mint cond. $260
2 bran new in the box skunk 2 pro intake manifold $175 each Sold 1

precision 850 hp intercooler $490
areomotive fpr mint cond. $190
msd digital 6 with hvc coil $325
rc 1000's $200 Sold
3 bar map with pigtail $90
arp 1/2 inch head studs new in the box $80
weldon 2025 fuel pump mint cond. $650
skunk 2 adg cam gears red $150
kyb shocks new in the box for rear ek $125
hondata s200 with gsr ecu $200 sold
hasport full race mounts for ek with B series $250
ek gas tank with full race sump welded on $150
t3/T67 ho $500
Nukin ram horn with 3" dp $550
skunk2 coil overs with drag springs $180 Pending sale
skunk2 pro rear camber for ek/eg/dc2 $100
will provide pics if needed. prices are a little flexible but please no low ballers

Modified by Desir Performance at 8:00 PM 6/4/2008


Modified by Desir Performance at 8:01 PM 6/4/2008

 

FS:
3" SS EXHAUST WITH VIBRANT MUFFLER 400 (PU)
MADE BY: TEMPEST RACING
CAME OFF A '97 CIVIC


MORE EXHAUST PICS:
http://i169.photobucket.com/al...1.jpg
http://i169.photobucket.com/al...1.jpg
http://i169.photobucket.com/al...1.jpg
http://i169.photobucket.com/al...1.jpg
http://i169.photobucket.com/al...l.jpg

FULL-RACE PRO STREET 4-BOLT DOWN PIPE 250 SHIPPED



FULL-RACE VACUUM BLOCK (BRAND NEW!!) 60 SHIPPED
NO NEED FOR A PIC ITS BRAND NEW LOOK http://www.full-race.com/catal...4be12




Modified by turboed4dr at 8:49 PM 6/1/2008

 

aeromotive fuel pump voltage controller. $215 shipped
jg edelbrock nonpolished GSR intake manifold. bnib. $315 shipped
oneFab topmount t4 manifold flanged for tial 46mm wastegate. comes w/ 4" downpipe. $1000
ITS t4/t66 dual ball bearing p-trim turbo. .81a/r 4" backhousing. no shaft play, no ships, no leaks, no smoke. $1000
aem ems 30-1400 for 84-93 5.0 mustangs. $1000
tilton hydraulic throwout bearing w/ clutch master cylinder and lines. $250










Modified by building boost at 7:27 PM 6/9/2008

 

aem 3.5 bar map sensor... $100 shipped
summit racing -8 fuel filter 100 micron. used for 200 miles SOLD
precison 750 fmic very good condition SOLD

12x24x3 fmic not sure what brand 125 obo

k series valve cover. best offer not sure what it off of was sitting in my shop

88-91 civic crx B series mounts. not sure what brand 125 obo

b17 head from 93 gsr same as b16. 350 obo no dizzy


Modified by 1QwIkEf at 9:07 PM 6/4/2008

 

Full-Race Ramhorn Manifold T4, flanged for 40mm gate
Tial 40mm gate
i have a downpipe and dumptube for this ^
Apexi AVCR with all the boost goodies.

---Pictures are in the thread below. along with prices. but give me an offer it probably wont be refused

https://honda-tech.com/zerothread?id=2302022

 

<FONT SIZE="4">FS: 96spec ITR Head.</FONT>

This head has been completely rebuilt at Abacus Racing. It has 0 miles since rebuild. This head has been hot tanked, sand blasted. its ready to run. This head has seen 241 NA WHP on the stock porting so it'll make power for you.

It contains:
--RM Dual valve Springs
--RM Retainers
--OEM Valves
--ITR LMAs
--New valve stem seals.

Price: $800

<FONT SIZE="4"> FS: RLZ LMAs</FONT> Lost motion assemblies. will fit any: b16/b17/b18c head.

This design modifies the LMA to not break when a high lift cam is used.

Price: 100

<FONT SIZE="4">FS: Cometic Head Gasket for B series VTEC Motors.</FONT>
Will fit b16/b17/b18c blocks/heads. WILL NOT FIT LS-VTEC MOTORS.

The Bore on the gasket is 85mm. The thickness is .051" (stock is .030"). part # is com-c4182-051

This gasket is typically used on sleeved turbo motors to lower the compression a little bit.

Price: $80

<FONT SIZE="4"> FS: Integra Type R LMAs</FONT> (Lost motion assemblies). will fit any: b16/b17/b18c head.

These are the better of the 2 designs of integra LMAs. they have the bigger oiling holes

Price: $75 for the set of 8 (each individual one at the dealer is $40-$50)

<FONT SIZE="4"> FS: used Hondata Intake Gasket</FONT>. will fit any: b16/b17/b18c5 PR-3 head.

Price: $40

<FONT SIZE="4"> FS: H22 Spring-type LMAs</FONT> Lost motion assemblies. will fit any: b16/b17/b18c head.

This design is a bit stronger than the ITR ones and will hold up better when using aftermarket cams.

Price: $80 for the set of 8 (each individual one at the dealer is $20-30)

I accept cash, paypal, and other forms

-Francisco
757-575-2416


Modified by RPRacing at 5:25 AM 6/2/2008

 

92 EG rolling chassis, 100% mint clean shell. Never any rust, never any damage. Bought the car from down south and it has never seen rain or snow. Garage kept from the day i bought it.
Car was painted inside and out a few years ago, Audi TT blue paint. No dents, scratches, dings...nothing.
Engine bay, front bumper and fenders all new paint. Fenders have been cut 3/4" rolled and painted, along with bumper and side skirts to match. Front bumper plate mounts shaved.
Chassis has a NRG-Tech 10pt Cage, window net, and chute mount. NHRA certified.
All new brake lines, custom bent to keep engine bay clean. NRG-Tech hidden battery kill switch.
Car will be sold with stock suspension, no seats, no gas tank, no gauges, besides that full interior, full exterior with JDM plastic headlights and true vision corners. If buyer wants suspension or seats or fuel tank we can work out a price and i will leave all that in the car.

This is one of the cleanest cars around!! We get compliments every time the car is out. 100% mint, super clean rolling shell, NHRA legal. Perfect for power street or T/S SFWD. Over 7k invested in paint and chassis work alone, not to mention the cost of a rust free shell. You can not beat this deal if your looking to build a clean SFWD type car!!! Anyone who has seen the car will vouch for this.

PRICE DROP $5000








(for more cage and fab pics see this thread https://honda-tech.com/zerothread?id=2238643)


M&H DOT cheater slicks 26x10.5 Brand new! Only mounted on wheels, and driven in/out of the trailer. No passes or burnouts ever made on them. Still see John's "Good Luck" writing.
$300



Hoosier Quick Time Pro's 26x9.5 Dot Bias Plys. Made 4 passes on these tires. Currently mounted on 15" polished Rota slipstreams 4x100. Take the 4 slipstreams with 2 hoosies, 2 street tires. Or i can break them down and sell Hoosiers and Rota's separate.
$275 for 2 QTP's






Sumped EG gas tank. Custom 666fab sump, low profile, wide body sump w/ dual -8 male AN's
Tank is brand new, bought it new, sumped it, has only been on the car for 1 dyno session and 4 passes. (don't know the actual measurements of the size of sump, will measure tomorrow)
$300





Aeromotive fuel sample valve
works perfect
$60



2 Sparco "Speed" matching seats
$275 each
(see pictures above)

1 Sparco slider/seat mount for d/s EG/DC
PRICE DROP...FREE W/ SEATS

Moroso poly/sealed NHRA approved Battery Box
$75



Moroso 5qt trap door oil pan, comes with pick-up of your choice GSR or LS
$300


Oil feed line -3 steel braided
Oil Return line -10 steel braided w/ heat sheild
$50


Mr. Gasket 10" Electric Fan
Used for 1 dyno session and 1 race, cooled engine down a bit more than the spal
s-blade we had on it last year. I really like this fan! Dont have any pics yet, here is a link to it on jegs http://www.jegs.com/p/Mr.+Gask...10117
$50


Skunk2 Short shifter and Shift **** combo
mint condition, slightly used
$100


1.05 T4 divided back housing from our 4088R
used a few passes, will have a fresh sandblast done before shipping
$ Best offer



PLX M300 Wideband. Great condition
Sensor, wirring, display, ect ect. Replaced the sensor 4 weeks ago.
$220

CLICK PICS FOR BIGGER!!!


Modified by 2 0 3 at 1:15 AM 6/7/2008


Modified by 2 0 3 at 12:22 PM 6/16/2008

 

updated as of 6-9-08

* thumbs are clickable !


* OMC coils (coil on plug) with bracket
- fits b series vtec heads
225.00 + shipping











*obd2b to obd2a jumper harness
150.00


-




*AEM 1020 (obd2a)
- setup for hall sensor (T1 trigger or AEM EPM)
- comes with serial cable and the latest software
900 shipped




* B16 block with crank. block has some messed up holes where driver side mount bolts on, can be fixed. 75.00 + shipping










* Billet Aluminum shock tops from Strange Engineering50 shipped


* Circuit worx 4.7 final drive for b16/ls trans 500 shipped




* Crane Ignition HI-6 with LX-91 External Coil 250.00



* Str sparkplug cover 75 shipped



* Greddy TVVC Boost Controller 200.00 the most bad *** manual boost controller ever !





* eibach front and rear sway bar kit with endlinks etc, i belive its everything for installation. 250.00










* Autometer 3 3/4inch Sport Comp Tach, with mounting bracket 75.00 shipped






_______________________________________________

Oil Catch can
80 shipped
* fits 1-3/8 filter
* -12 an male bung
* 1/4npt drain/plug










__________________________________________________ __________

10 inch tall coil springs
* fits 2.5inch shock
* 350lb rate
50 shipped





__________________________________________________ __





Modified by DaveF at 8:42 AM 6/9/2008

 

SOLD


Modified by slow *** si 1 at 12:39 PM 6/7/2008

 

AEM 3.5 bar map sensor.. New never used, just wired up... $85 shipped....

 

I have a 2.2 (2224cc) B-Series (85mm X 98mm) Long Block
very low miles (maybe 5 Hours on it)
Includes:
Castillo's 98mm B20a reworked crank
CP Custom 85mm 15:1
Crane / Ferrera Roller Cam System Custom Grind (.520 lift)
AIR Intake with Bosch Blue Top Injectors setup for Methanol
Custom Cunningham Ultra-light rods
Endyn b16a Head - Flowed 301 CFM at .500 lift on PortFlow's Superflow
Golden Eagle sleeves and deck riser
ARP fasteners through out - Head Studs, Main Studs

 

I have a few good parts for sale.

Brand new 50mm TWM K20 ITB with fuel rail and tps: $1200







Golden Eagle B-series Cam Gears 1 red and 1 blue brand new: $75 each



Odyssey PC 625 battery and charger: $100



Please IM if interested

 

aem obd 2b for 2000-2001 si,integra $800 obo with t1 ready option
m&w pro-12 both with ignition coils & engine harness $800 obo
t1 cam trigger with bracket & harness $450,paid $600
velocity stack $50 used turbonetics

 

well, im at it again.


billet. hurst pistol grip shifter.

30.00 will fit any shifter universal threads come with the kit. mint condition.

i have a set of front and rear fluid control solutions telon steel braided vinyl dipped dot approved brake line kit for honda, acura, evo, and subbies. first come first serve.





89.00 shipped
band new in the package. comes complete with all hardware and washers and fittings.

120.00 new.
please email me at hellomrparks@yahoo.com

or pm me here.


thanks parker



Modified by MrParks at 2:10 PM 6/11/2008

 

As many of you know here i was involved in a serious car accident back in sept of 06, as a result of it my life has been turned upside down and been a constant drain. I had 2 major spine surgeries with no success and then contracted a MRSA staph infection which i fought for 8 months on IV antibiotics. I was out of work for 1 year and pretty much lost everything to hospital bills and perscription bills that were costing 3k a month. Dave at SMSP started a donation fund here https://honda-tech.com/zerothread/1828476 in the allmotor forum and many of you donated to help my fiancee and i out and it was the single thing that kept a roof over our head at the time, you raised over 4k for us I went back to work for 10 months after the surgery's and had to work as much overtime as possible to try to catch up. Well that of course left no time for the race car and any car related stuff. My partner and i broke up and i had to take out a loan to buy him out on the race car which i thought i would be able to use again someday. Well my spine over time has gotten constantly worse, so on may 23 I needed to go in for a spinal fusion surgery and they put about 10 pieces of titanium in my spine. They say theres only a 30% chance that this is going to fix my problems and a 70% that it could at least help with some of the pain..
Anyway I'm now of of work again for a minimum of 10 weeks and thats if i can even go back at all.
The reason I'm telling all this here is because i need to sell all my stuff.
Im selling my turn key pro stock project 300 drag car as well as a ton of parts for it.
the car is a 95 civic hatch and it's has nothing oem on it aside the shell. The car made 280 whp on RLZ's dyno which is said to be over 300 whp anywhere else since their dyno reads so low. we also only made 8 dyno pulls on the car and did no cam gear changes, the car made our goal as it sat and we didnt want to wear it out making pulls on the dyno. there is more left in this motor easily
The car is outfitted with the best b series parts you can buy. I'll list some of the heavy hitter big dollar parts here and if there's anyone interested in it i can tell you over the phone the rest, there's literly to much to list. We have over 75k invested into this thing and I know I'll never get a fraction that back. I'm accepting any reasonable offers on it as it must go. I'll even take trades as long as it's something i can bring to carmax and get sold.

NOT PARTING OUT RACECAR MUST SELL COMPLETE


Everything hgere is brand new and only has 8 dyno pulls on it and approx 7 test passes down the track. Only 4 of the passes were full passes made at a nopi event in august of 07
Engine. 86x95
Custom coated Rlz wiseco box forged pistons. (900.00)
Custom billet 95mm crower crank with oil shedding thermal dispersant coating (2k)
Golden Eagle sleeved 86mm ls block , line honed and bore/hone done by Rlz
1 off custom Hunter performance rods with 5/16 lightweight bolts
Moroso External oil pump and matching oil pan
Ati harmonic balancer race pully

RLZ 310 cfm ported ITR cyl head (this head is considered to be one of the best in the world, it broke many records)
RLZ springs and retainers
Ferrea custon Rlz valve's
Skunk Pro 3 cams
Golden eagle cam gears with earth magnets
Custom Hogan intake manifold (1300.)
T1 hall sensor cam trigger setup
Aem 1040 engine management
M and W Pro 14 ignition
OMC coils run sequential
Edelbrock Qwikdata datalogger with Egt,fuel pressure,water temp,oil temp, Ect
Aem external wideband controller
95 lb injectors
Weldon fuel pump (800+)
Weldon fuel filter
Weldon fuel pressure regulator
Custom made wire harness all sheilded wires used.
custom Burns spec 4-1 side exit stainless header with burns collector and megaphone
Moroso aluminum fuel cell that fits battery location
Custom solid motor mounts.

G-force 4 speed dog box transmission(cost over 9k)
dog gears for clutchless shifting
custom bearings unlike any other trannys available
5th gear location handcuff to keep shafts seperation from happening
100% custom straight cut gears nothing at all oem aside from the case and the gear selectors
This tranny was hand built by the head guy at G-force, i have pics and videos at gforce when he was doing this. This is the baddest tranny i have ever seen and it shift better then any other i have felt.
G-force Long short shifter kit with custom shift rod. This shifter keeps you from missing 3rd gear as it pulls over for you. We also have the button on it connected to a solenoid that locks the rear brakes for launches and burnouts
Mark williams spool
Mark williams axles and hubs with huge 4 piston Mark williams brakes(over 5k)
Tilton Carbon carbon twin dissk clutch with spare friction plates(5k at the time)
Tilton pedals and reservoir's
Custom 1 off Kaiser lightweight 16 in drag wheels with brand new hoosier slicks(these have 3 launches on them)
Custom Kaiser rear skinnies with hoosier rubber.
Comp engineering adjustable traction bars
Comp end custom controll arms(these were sent back after everyone had their problems with them and they personally drove them to our shop and helped install them, they claim there wont be any issues with them, we havent had any)
Mb products 1 piece front end
Mb fiberglass doors
Mb fiberglass rear hatch
Brand new fire system with cockpit and engine bay spray nozzles
Brand new engine diaper
Lexan job is perfect with all stainless steel allen head hardware, no wavy windows or wind sheild.
Ground controll advance design suspension(3500.00 suspension) as well as camber kits and upgradded bushing on the whole car

NOT PARTING OUT RACECAR MUST SELL COMPLETEMake an offer guys , you'd be surprised how desperate I am.

Ok there's alot more small stuff but you guys get the idea. I also have the parts to build a complete 2nd race motor with 95mm crank , aluminum rods and custom pistons, fresh 86.5mm GE sleeved gsr block , RLZ race head. If the offer if high enough i will throw this in with the purchase of the car, so your basicly getting another 7k in motor parts.

Due to time constraints and not having a place to do it nor the physical capabilities I'm not parting out the car. If someone else wants to then they will have to buy it and do it.

Here's some pics.click on them for larger view













I have many other new and used parts , /roller rockers with cams, two brand new 3in stainless mufflers,sparco blue suede wheel with sparco quick release ecet ect that i will add to this tommorow, this took all day to put together and I cant sit here any longer. I appreciate all your help in moving this stuff, you guys will be saving me and my home.
I can be reached on my cell 860-978-1318 Tom


I also have a brand new never used Kens custom chassis solid rear axle setup with weld spindle mount wheels.

[/i]



Here are 2 new CPE stainless 3 in 3 out mufflers, they sound real good on turbo mazda's but i havent heard them on a honda,they will fit perfectly though, i also have 3 15.00 each stainless hangers for them. These cost 400.00 Make offers, I'll sell them single if needed





Spare Weldon fuel pump for the racecar, I'll throw this in with the car if the price is right, or make offer's



Next up is my set of Ferrea roller rockers with custon 1 off cams, these are not cams you can buy anywhere they were specificly made for my partner when he built his 1st motor for the racecar.
Also the matching plated dual valvespring and tianium retainer setup, this stuff is good for over 12k rpm . I would run them in a high revving turbo car if i was going to keep them.






Brand new in box prologger tuner/wideband/datalogger/boost controller. This is new complete kit with all options, only thing missing is the 3 bar map sensor that i loned a friend and never got back.




Spare OMC coil brand new bought from Tony 1


Supertech flat faced inatke valve's .5mm oversize and stock size Omni flat faced exhaust valves.
brand new.




Modified by Tbone at 3:54 PM 6/17/2008


Modified by Tbone at 3:55 PM 6/17/2008