TealEG!

Sold


Modified by TealEG! at 8:51 PM 6/26/2008

GotRiceYo

^ B series correct?

FS: BNIB B18C ACL Race bearings

https://honda-tech.com/zerothread?id=2310735

kenbdSi

FS:
Ls head- Head is complete. Powder coated valve cover(black). Comes with KMS valve springs and titanium retainers(less than150 miles).-$325

Edelbrock Victor X intake manifold(b18b)- Powder coated in black-$225

$100-Selling a 3 inch downpipe with V-band flange. It was made for the compressor side of the turbo to be on the passenger side of the car.





Pay pal and shipping not included. Pm me with serious offer. Thanks



Modified by kenbdSi at 7:03 PM 6/10/2008

Tyler H

AEM UEGO Gauge type wideband controller. BRAND NEW. Make offer.

USDM OBD1 P72 ECU. Stock, never chipped. Make offer.

ciscoscivic

motec cdi-8 ignition setup with coils and harness, bought from t1 used make offer.

driveshaft shop upgraded 5.9 axles with moroso titanuim intermediate bar all new make offer
strange spindle mount weld aluma star wheels. new never mounted make offer
crower billet stroker crank 92mm. used make offer

manley b18c turbo tuff rods, with new arp bolts, used in chuck s hr car make offer

new aem boost control solenoid, make offer
EG drivers side MB PRODUCTS fiberglass door make offer.

FULL-RACE intake manifold. ported buy headgames new never used make offer

1994 HONDA CIVIC SHELL. SOLD NO DRIVETRAIN, ELECTRONICS, OR GAUGES
CAR IS THE OLD MOROSO CIVIC, I HAVE OWNED IT FOR 4 YEARS NOW AND ARE READY TO MOVE ON. THE CAR IS COMPLETELY AIRBRUSHED PAINT COST OVER 15,000. HAS A 1 PIECE FIBER GLASS NOSE. STILL HAS STEEL DOORS AND TRUNK LID. THE REAR HAS BEEN CUT OUT AND THE FIREWALL HAS BEEN REPLACE!!!! CAR WEIGHS 2610 WITH DRIVER OF 178. HAS A MILD STEEL CAGE THAT IS CERTIFIED TILL MID NEXT SEASON. HAS ONE PIECE CUSTOM REAR AXLE, AS THE FIRST WILWOOD CIVIC BRAKE SYSTEM, OMNI POWER DOUBLE ADJUSTABLE DRAG COILOVERS IN FRONT, COMP ENGINEERING SHOCKS IN REAR, HAS A NEW WHEELIE BAR SETUP JUST PUT IN FOR THE LAST 2 RACES OF THIS PAST YEAR. COMES WITH CUSTOM MIDPLATE WITH SCATTER SHIELD AND ENGINE MOUNTS. WELD RACING WHEELS WITH 2 RACE OLD 26/10.5/15 MT AND NEW SKINNYS IN THE BACK. CAR HAS GONE 9.79 @145 AND 10.1 AT 158 THAT WAS WITH A REALLY WORN OUT SET OF SLICKS AND A MANUAL BOOST CONTROLLER. BEST 60FT IS 1.45 AT ETOWN #2 LAST YEAR. CAR IS REALLY NICE AND WOULD HATE TO SELL BUT NEW PROJECT IS LAGGING BEHIND SCHEDULE AND NEEDS A MONEY PUSH. IM NOT SETTING A PRICE BUT WILL TAKE OFFERS. IF THE OFFER IS FAIR I WILL SELL. ALSO , I WILL DELIVER THE CAR UP TO 500 MILES FROM 02860 FOR FREE









Modified by ciscoscivic at 11:02 PM 6/3/2008


Modified by ciscoscivic at 7:03 AM 6/9/2008

mec. pedri

iTrader: (1)

3 b16 crankshafts ..all original no scratches on journal 150 shipped

1 99 h22 crank with 55mm journals all original no scratches on journal 200 shipped

pair of circle racing wheels (now spunwerks)

4 x 100 15 x 8 new condition 450 shipped

MT 26 x 8.5 slicks with 2 passes on them 250 shipped

HybridKOOP

Brand New - Hondata DEALER tuning kit w/ chipped P28 - Includes S200B w/ all options, Romulator, chip burner, cables, software, start your own tuning business $Paid $1150 + shipping, first $750 TAKES ALL
Brand New - Honda OEM main bearings $50.00
Brand New - MOMO Jet steering wheel $175.00
Brand New - HASport B-Series mounts for DC chassis $300.00
Brand New - Mazworx parachute release kit $50.00
Brand New - G-Force window net w/ mounting kit $35.00
Brand New - DEPO OEM EG fog light kit $100.00
Brand New - EM/EK OEM driver-upper liquid-filled engine mount $25.00
Used - DC2 OEM upper engine mount $20.00
Brand New - OEM Vouge Silver Metallic 1996-1998 Civic 2-door spoiler w/ brake light $75.00
Mint Condition - '00 GS-R rear transmission bracket $40.00
Used, works perfect - B-Series flywheel cover $15.00

tagperformance

2.0L Gsr race longblock. $3000 firm or willing to sell the head and shortblock seperately. short block $1800, and head $1200
84.5mm bore,arias forged pistons,LA Performance sleeves, eagle forged rods, calico coated race bearings, arp main studs, arp head studs,
gsr head,cnc ported, 5 angle valve job,crower springs and titanium retainers,new bronze valve guides,new valve seals, ferrea stainless steel valves. serious inquiries only. If info is need call brett at lawless engines 702-644 5534











Modified by tagperformance at 11:53 AM 6/4/2008

rebo0t

H22 head, Skunk2 race port/polish/valve job, skunk2 ti retainers, valve springs, stainless steel oversized +1mm int, +1mm exh. valves, welded combustion chambers, resurfaced and ready to drop in, all brand new parts never ran since Skunk2 port work. $1500

ATI Performance H-series super crank damper/pulley, part number #918469 race. It has no grooves for alt/ps/ac/etc. Its the race version with only a damper and degree marks on it instead of grooves for belts. brand new in box $350

New in box Aeroquip push-lock -6AN 10ft blue fuel line, (9) straight AN fittings, and (3) 90degree AN fittings, $140

Custom turbo oil feed line for -6AN fittings, about 20" long, brand new $50

lines:
http://img295.imageshack.us/im...8.jpg
http://img295.imageshack.us/im...1.jpg

head:
http://img155.imageshack.us/im...5.jpg
http://img72.imageshack.us/img72/6626/head2ej2.jpg
http://img301.imageshack.us/im...6.jpg
http://img301.imageshack.us/im...9.jpg
http://img294.imageshack.us/im...6.jpg

fuel line:
http://img182.imageshack.us/im...7.jpg

ati pulley:
http://img299.imageshack.us/im...1.jpg

msmotorsports

!!!Garage Sale!!!

If interested in anything please contact me via PM. Thank you!


B18C1 P72 bare head and valvecover. Comes with cam caps and bridges. (No followers, valves, springs or retainers) good condition. $300.00





Ferrea Roller Followers $700.00




Crane cams roller camshafts (Turbo grind) $500.00



AEM wideband oxygen sensor $200.00



S80 GSR hydraulic transmission, no grinds, 1-5 gears, reverse gear and synchros included. No differential or final drive $350.00





Circuit Worx Final drive 4.72, only 5 passes on it, like new! $600.00




B series intermediate shaft 99 CRV $50.00



Edelbrock 65mm throttle body $200.00





Skunk2 dual valve springs $125.00
Skunk2 titanium retainers $125.00



CBR ignition coils with wire harness (for coil on plug ignition system, distributorless) $75.00




Powermaster 16v battery, like new condition $140.00



GM boost controller solenoid with wire harness $30.00



AEM 5 bolt cam gear $60.00



Hasport custom machined solid motor mounts. For B-Series into EF chassis. Rear mount and driver side mount only. One of a kind! $125.00




Autometer ultralite oil pressure gauge 2 1/16", Electric (sender included) $35.00




AEM 3.5bar (50psi) MAP sensor with wire harness $100.00



95 GSR intake manifold air temperature sensor $20.00



95 GSR coolant temperature sensor $20.00



95 GSR knock sensor $35.00



B series starter $75.00



Hondata heatshield intake manifold gasket $50.00




Mr Gasket copper exhaust manifold gasket B-series head $30.00



used Cometic head gasket (usable condition) $45.00



Simpson Platinum 5 pt harness (dated March 07) $75.00




Bieffe predator helmet size medium (SA2000 safety rating) - $225.00
shield has been mirror tinted. Few small nicks that have been touched up.





[B]Sparco 5 firesuit, size euro 54, color white/blue trim, SFI 3-2A/5 rated - $445.00
link to Sparco sizing chart http://sparcousa.com/resourceFiles/29.pdf[/B]





Sparco Top 2 race shoes, size euro 43 (US 9.5-10), color black- $125.00




[B]Sparco GP2 race gloves, size euro 9 small, color black/grey- $65.00
Sparco sizing chart link http://sparcousa.com/resourceFiles/17.pdf[/B]




Modified by msmotorsports at 11:36 AM 6/9/2008


Modified by msmotorsports at 11:41 AM 6/9/2008


Modified by msmotorsports at 10:49 AM 6/11/2008


Modified by msmotorsports at 11:43 PM 6/16/2008

cotorresgee

iTrader: (1)

I have some Rc 750 cc injectors $250 spearco front mount intercooler $150 and Turbo xs dual stage boost controller $150

PM me and I will email pics, buyer pays shipping and paypal fees



Modified by cotorresgee at 4:14 AM 6/9/2008

sportfwddc2

70mm BLOX throttle body brand new never used was just a mock up $150
3 Bar PROLOGGER map sensor brand new still in package $70 bucks
PM me and i will email pics, buyer pays shipping and paypal fees

Blown90hatcH

FS: Brand New Genuine Garrett Ball Bearing GT4294R, 1.01 AR. T4 Flanged. Twin Scroll / Divided Housing. 4" V-band exhaust outlet. V-band discharge. Brand new, 0 miles. Exhaust housing was 1600degree HPC thermal coated black. Also includes water fittings and orings as well as Earl's black hoses and black fittings. Selling $1800 shipped via FEDEX insured. Paypal + 3% fees. If you need more pics, ask.....

vtecspeed1320

weld magnums 10x15's with 26x10x15 mt's 650

White lenso's with 25x8.7x13 M&H slicks 450

h22 civic

24.5x8.5x15 m&h slicks 85% thread left 200 bux
2-rota sub zeros 16x7 with 205x50x16 nitto 555r drag radials rims and tires are 9 out of 10 300 bux
greddy profec type s boost controller mint about 5 hours on it comes with oem book and papers 299 bux
msd 6al with polished blaster2 coil and msd wires works flawless also low hours 175bux
2-genuine racing hart 5 x 114.3 uni cp035s flat black 16x7 600 bux 9 out of 10
2-genuine racing hart 5x114.3 uni cpo35s flat black 15x7 500bux all wheels are 10 out 0f 10
msd rpm activated switch 25 bux
zex dry nitrous system complete 300 bux
4 racing hart 5x114.3 c2s 18x7.5 with toyo 215 45 18 600 bux rims are 9.5 out 0f 10
full stainless 3" mandrel bent exhaust for ek hatch fits 110% perfect 350 bux brand new

LERRY

well my car was stolen so i am done with hondas, i'm getting out of the scene and am going to purchase a new car and bike. heres the thread: http://www.hondamarketplace.com/zerothread/2316529

anyways parts are located in the socal 626 area and i'm pretty firm on the prices, they don't include shipping. i'm not in a hurry to sell.

GT3582R dual ball bearing turbo with less than 500 miles on it, MINT condition no shaft play, straight T4 - $1000
Exedy B-Series Hydro Twin Disc clutch - $950
ARP B18/B20 main studs - $75
Precision 1000cc injectors brand new never used still in case - $300
85mm golden eagle brand new head gasket - $80
2nd gen b16 head, mint condition. comes with valve cover, cam caps/rails/bolts - $250
Function 7 turbo oil return line w/ fittings - $70
Darton sleeved B18B1 LS short block 85mm bore, 85mm arias 9.8:1 pistons w/ brand new rings, crower rods, micropolished LS crank, oil pan, windage tray, oil pickup all unassembled - $1300
Brand new in box OEM Type R oil pump - $100

JDMisGOOD

Looking to sell or trade! <FONT SIZE="4"><FONT COLOR="red">Asking $6500 </FONT></FONT>

1993 Honda Civic Race Ready Shell! Drop in your swap and go racing!

Has gone 10.21@142mph

MB Fiberglass front clip
Custom pearl/air brushed paint over $6g's in paint work.
4130 Chromoly tig welded cage
Custom traction bars
Lexan windows
Simpson parachute with custom mount and lever
Custom 4130 Chromoly wheelie bars
Tokico drag suspension
Brembro brakes
SDS Engine management. Crank triggered set up. Includes all sensors and coils.
Moroso switch panel
Moroso fuse panel
Moroso fuel cutoff
Custom wiring and relays
PLX Devices datalogging wideband
Momo Seat
Momo Suede steering wheel
Momo hub
Simpson harness
Full Autometer gauages water,oil,volt,tach,shift light, boost
Rci 3gallon fuel cell
Aeromotive A1000 fuel pump
Aeromotive filter
Aeromotive fuel pressure regulator
Autometer fuel pressure gauge
Earls AN fittings
Earls -8 feed and -6 return lines.

I'm sure there is more...

Great for a weekend racer or update it for Hot Rod. Car is located in Minnesota. Delivery in the lower 48 available!





*Girlfriend not included.*

<FONT SIZE="4"><FONT COLOR="red">Asking $6500 with all of the above listed. </FONT></FONT>

<FONT SIZE="3"><FONT COLOR="black">**No engine,transmission,axles,shifter,turbo setup, radiator,wheels or tires. Will be sold on steelies. Can remove anything to make it cheaper.**</FONT></FONT>

XREDLINE2

SELLING A BRAND NEW IN THE BOX MSD PRO-BILLET DISTRIBUTOR SET UP, COMES WITH EVERY THING YOU NEED TO RUN IT, DIRECT PLUG AND PLAY TO OBDII ,CAN ALSO BE USED FOR OBDI BUY USING MAD DISTRIBUTOR JUMPER HARNESS WITH COST ABOUT $20-$30 PN8864

THE PRICE IS $500 **FIRM**


MSD PRO-BILLET DISTRIBUTOR PN8488


EXTERNAL IGNITION MODULE PN6305


COIL PN8235


ALL 3 PARTS ARE BRAND NEW IN THE BOX

OPTIONAL 0BDII TO OBDI JUMPER HARNESS

TommyC83

Precision GT4067R with garret divided 1.06a/r hotside $800 shipped....

Also have Tial 50mm box brand new in the box silver in color and i think i have aluminum and stainless flanges so you can choose which one you want $225





Modified by TommyC83 at 6:00 PM 6/9/2008

2fastGSR

Very High quality Hitech Side exit for H22 .

4-2-1 Race Header.

No its not fake, its the older version

$800

ImportSports

For Sale: Used quaife differential for small spline cable trans. Never driven on the street, has about one season (less than 100 miles) in our all motor car. $700/obo. I will try and post pics as soon as possible.

I B BANGGIN

all parts are fairly new with only a few dyno pulls on...
will send pics if needed..parts are located in houston texas, buyer pays shipping
feel free to contact 281 736 7889 ricky
rcantu83@yahoo.com
lenso rims and slicks , about 10 passes,13x7 and 24.5x8x13...$450

bogart runners with tires 15x3 (i think) $400

ctr tranny with 4.78 final drive, podrive spool, circut worx speed sensor ring gear, will throw in shift linkage...no grinds $1200

competition clutch twin disk with about 5 dyno pulls, no track time..$950

complete fuel system..2 gallon jaz fuel cell with roll over vent, aeromotive a100 fuel pump, aeromotive fpr, fp guage, skunk2 composite fuel rail, all earls fittings and steel braided lines....uses -10an for feed and -8an for return...$650

precision 1000cc injectors...$175

complete b16 longblock...81.5bore 9:1 compression supertech pistons, eagle rods, golden eagle block guard, mirco polished and balanced crank, new water pump and oil pump(westside performance did all work), port and polished head, supertech 1mm oversized valves (flat) supertech valvetrain, ctr cams, skunk2 cam gears, 0bd1 dist, alt, ngk power plus wires, all new honda bearings and gaskets...$2000

edelbrock (b16) intake manifold with hondata gasket $275

alum radiator with slim fan...$150

comp engineering traction bars..$175

bdl 72mm trottle body..$250

endyne catch can with all -10 an fitting and steel braided lines..$125

ati dampner (race version)...$300

golden eagle scatter shield...$150

golden eagle vac block...$45

complete turbo kit..full race ram horn manifold, tial (purple) bov, tial 38mm (silver) wastegate, nando fab 3in side exit down pipe, dump tube 3in piping (cold side) 2 1/2 (hot side), all 4ply couplers, tbolt clamps, feed line, return line, 3in intercooler, 3bar map sensor, turbonetics dual bearing t62-1 turbo, p28 with basemap for start up.....$2700

msd 6al ign..$75

rolling race car shell....92 honda hatchback, all new lexan windows, 8pt cage, parachute mount, cnc staging brake, ken kustoms brake master cylinder, all new custom steel braided lines, kirkey alum racing seat, fuse panel, automete silver guages (water temp, oil press., volts, boost, rpm tach) fiber glass one piece front end, 1k rear progressive springs, kyb 5way adjustable, skunk2 coil over for front, omni front camber kit, d2 camber kit for rear, fresh paint from gbc customs....$3000

turbotypeR@SPEC

Tial 60mm wastegate: $450 or trade for 2 44mm
only used for a handful of events. i will include flanges,however they will be cut off of the manifold and dump tube.

.CUBISH.

Turbonetics 60-1 t3/t4. stage 3 turbine.. .63 a/r.. polished cover.. V-stack..
good for mid 500's. powered my car to a 10 sec pass. no shaft play or anything.. still under warranty
$450


greddy profec b type s boost controller. black face..dual stage $150


Factory Type r Diff.. $250

used 780cc injectors $200

ngk afx wideband gauge. only a month old. works great $200

wright54

97 civic Coupe

Engine
GSR block
Darton MID kit 85MM
CP pistons 85mm (brand new)
Manley Turbo Tuff rods (LS)
OEM LS crank

Brand new b16 Head (0 miles on it)
Not sure what cams either GSR or Type-r
OEM size Ferrea valves
Ferrea Springs and retainers
Venom cam gears

Fullrace Top mount
Tial gate
Borg warner 72MM turbo
Dual Tial BOV's
Golden Eagle Manifold
1000cc injectors (used) as well as bran new 1600cc injectors
Brand new Oil catch Tank (battery mounted)
Battery relocated to the trunk
Omni power suspension front and rear

More to list.

I bought the car off of Jason Hunt last year and I do not have the time to race it because of work and going to school. The engine was just rebuilt by Jim Justice and the car has only been moved around since the engine was put back into the car. The cage is 8.50's certified and I had the cage re-certified last year. My fastest time in the car was a 9.75 at 154.

I am looking to get a serious offer on the car please no BS like Vadriven. If I need to add a price to this post I will but, for now I am looking to get some offers. I will also take some pictures of the car and add them asap.

Videos

http://videos.streetfire.net/v...5.htm
http://videos.streetfire.net/v...5.htm


Modified by wright54 at 2:36 PM 6/12/2008


Modified by wright54 at 5:09 PM 6/12/2008