Hello I am just trying to find out what my car is likely to do in the 1/4 mile, car two door teg weighs 2522lbs including driver @8psi I get 170whp and at 10psi 196whp, no lsd but have koni yellows and low springs on street tyres toyo T1s any ideas . Thanks

 

im guessing mid-high 14's with excellent driving

 

For the low boost setting do you mean? I am hoping for high 13s with 196whp.

 

I don't think you're going to get it without at least slicks.

 

Any of you guys actually run the 1/4 with a similar setup I've seen a few guys do 13s with less power same sort of weight 2500lbs no slicks.

 

whats your fuel set up??

 

https://honda-tech.com/zerothread?id=230175

 

Thanks so I guess your saying yes 13s but your going to need drag radials.

 

We took my friend's turboed civic ex (si in Canada) and he ran a 15.3 on a hot and humid day. Elevation was estimated at 6300 ft and time corrected, it wouldv'e been low 14's or so. I'm pretty impressed because before, his car woulds ran a 17 or so, and other cars of the same setup have usually ran a high 16 - low 17. Oh yah, his set up is a basic drag kit at 7psi on street tires.


[Modified by ludelvr, 8:46 PM 7/15/2002]

 

still wondering what your fuel set up is???

 

370cc, 8:1 fmu vortec, field afc, 255 lph intank pump.
oh and 1.1 bar f- max kit 12.5 112mph

 

Nice times cars gutted I suppose?any dyno numbers!
ah my fuel setup is a piggyback style chip running 3 extra injectors with ignition timing retarded on boost, hi flow fuel pump race gas at the high boost level.

 

i ran a 14.64 with my jrsc@6psi on my 89crxsi street tires and removed headlight.short style intake and some bull **** header and exhaust

 

15.4@86
93 4dr civic sohc non-vtec with full interior and a nice heavy bodykit. oh did i mention after about the 1/8 mile mark the car stated bogging

My only mods were:
t3/t4 turbo @ 10 psi untuned
holley intank fuel pump
fmu
stock block
stock injectors

Too bad on my next run i overshot the boost to 14 lbs and the damn car cut off

 

https://honda-tech.com/zerothread?id=178590 To the folks how said you can't run 13s without slicks .

 

teg with sohc engine? are u in japan?

 

New Zealand we get all kinds of JDM cars, the curb weight of a car is what just the car no passengers and half a tank of gas?

 

13's are possible but you will need drag radials for sure....

 

Didn't you check the link? dude's running 13s street tyres full interior ex coupe Curb weight is 2390 + driver with 8psi. So it can be done he's probably a very good driver though.