How hard is it to swap the front discs from an Integra onto my Civic. I know the gist of what needs to be done for the rear disc swap. But I've yet to find a good article for the fronts.

I know that for the rears I need
trailing arms
upper control arms
discs
calipers
and 99'-00' Si parking brake cable

What all do I need for the fronts? Could you include specifics on MC, prop valve, etc. If anyone knows of any good write-ups for the front, those would be appreciated as well.

(I checked and searched multiple times, but I cannot seem to find this specific information for my EG. I've seen a few really good threads for EKs though.)

 

For the rears you need:

- Trailing arm assembly with calipers/hubs/etc
- Rear disc soft brake lines
- 94-01 Integra or 92-95 Civic Si/EX ABS ebrake cables

For the fronts you need:

- Knuckle assembly with calipers/hubs/etc from a 94-01 Integra
- Front soft brake lines

Miscellaneous stuff you need:

- 15/16" brake master cylinder from a 90-91 Civic EX or 94-95 Integra RS (with brake booster)
- 4040 prop valve from a 90-93 Integra non-ABS or 94-95 Integra RS

Optional stuff you might want:

- Front/rear lower control arms in case you want to add sway bars later on.

 

just what i needed lol. I'm doing my swap tomorrow

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Rikaro &raquo;</TD></TR><TR><TD CLASS="quote">just what i needed lol. I'm doing my swap tomorrow</TD></TR></TABLE>

It's fun putting it on