i just put a t3/t4 50 ar trim on my em1 it currently untuned and stock hiw much pounds of boost would it have

 

id run at least 45psi on that setup.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CoreyR &raquo;</TD></TR><TR><TD CLASS="quote">id run at least 45psi on that setup.</TD></TR></TABLE>

i very much like this idea

F

 

PSI is irrelevant. Different turboes are going to make different power leverls at different PSI numbers. You should be more concerned with how aggressive your motor can be tuned before something breaks

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ser13 &raquo;</TD></TR><TR><TD CLASS="quote">i just put a t3/t4 50 ar trim on my em1 it currently untuned and stock hiw much pounds of boost would it have</TD></TR></TABLE>

There are a few good turbo shops in your area, I would advise you to find a shop to tune your car and make sure they deal with Hondas.

 

If your car is untuned and stock, you shouldnt be seeing any boost unless you like rebuilding engines. Once it is tuned properly, you could be somewhere in the 12-14psi range which will net you about 300whp. The pressure to get there is irrelevant...power is what kills engines