will a p28 ecu plug right into a 1996 honda civic ex? it currently has a p2p. thanks

 

no p28's obd1... 96+ is obd2...

 

u need an obd2a to obd1 conversion harness

 

oh ok thanks guys.

 

what are the specs on the p28, rev limit/speed limit?

 

Rev limit is 7200, not sure about the speed limit.

 

I believe it's an 118MPH, complete fuel cutoff

 

is there any way to bypass fuel cutoff? getting it chipped?

 

Anything can be adjusted gettin it chipped, My P28 Is chipped 8500 redline and no fuel cutoff

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ShortyzKustomz &raquo;</TD></TR><TR><TD CLASS="quote">Anything can be adjusted gettin it chipped, My P28 Is chipped 8500 redline and no fuel cutoff</TD></TR></TABLE>

make sure u send me pics when u bend a valve...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ShortyzKustomz &raquo;</TD></TR><TR><TD CLASS="quote">Anything can be adjusted gettin it chipped, My P28 Is chipped 8500 redline and no fuel cutoff</TD></TR></TABLE>

ebay chips are time bombs.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by THC07 &raquo;</TD></TR><TR><TD CLASS="quote">

ebay chips are time bombs.</TD></TR></TABLE>

so are stock valve train'd z6's being brought to 8500....

 

chipped u can change numerous things, including rev and speed limiters.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by roachsboosted16 &raquo;</TD></TR><TR><TD CLASS="quote">chipped u can change numerous things, including rev and speed limiters.</TD></TR></TABLE>

probably exactly how u got 240hp at only 8psi on ur d16...

lol unless u got pics of ur garrett gt40

 

Mines not ebay chipped, It was chipped when I converted it from auto to manual, The motor doesnt go past 7200 ever. And thats VERY rare to go that high. It was just all done at the same time by a reputable shop, cause when I bought my car it had the DX ECU running the Z6 and I had an auto P28 ECU in my shed, So I got it converted and chipped at the same time.


Modified by ShortyzKustomz at 9:16 AM 12/17/2007

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ShortyzKustomz &raquo;</TD></TR><TR><TD CLASS="quote">Mines not ebay chipped, It was chipped when I converted it from auto to manual, The motor doesnt go past 7200 ever It was just all done at the same time by a reputable shop, cause when I bought my car it had the DX ECU running the Z6 and I had an auto ECU in my shed, So I got it converted and chipped at the same time.</TD></TR></TABLE>

hmmm well to convert an auto to manual tranny u just jump the RP17 and RP18 resistors in the ECU, not sure if I completely understand what happened here with urs being chipped.. But a DX ecu wouldnt run a Z6 to good considering DX isnt set for vtec...

 

Exactly, It didnt run worth a **** and had no vtec, (Car was turbo'd and previous owner took the turbo setup and his tuned ecu, and left me with the DX) My friend does ecus and wiring all day long, I got him to convert it (jumper) and he chipped it at the same time. Im not good with soldering and this is his living so he just did it all at the same time. Im not trying to ruin this guys thread, I was just saying you can chip it to remove speed govenor, and that mine was chipped, I dont take it that high and never will but like I said, It can be done

 

my cars used and has a p72 what car did this come from and is it any good