sup guys im going to be building my first b20vtec.... ive allways had gsr motors.. but i want to go wit a bigger displacement....
what do i need to look for in this biuld????

old set up...
on my old gsr hatch (178hp-123trq) itm,h,e on uberdata don't ask me how but i did it... i ran 14.3@99.2mph wit a 2.6 60ft on street tires..

 

just throwing that b20 block on will get u down to low 13's for sure.... i use to have a stock *** b20vtec that ran 13.4 @ 103mph but with slicks...i mean stock.... stock b16 head stock intake, stock header, stock cam, stock TB, and the block is completly stock b20b block.... trans was a GSr with just a 6 Puck clutch just so i can use slick... and a getto chip ECU....... i miss it!!!

 

bump because im interested in this also.

 

what do u want out of this?

 

keep us posted on this build!! im going to be throwing the same thing together in a few months. id like so see how it works out for you!

 

sweet i will..

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AMLS4dr200whp &raquo;</TD></TR><TR><TD CLASS="quote">what do u want out of this?</TD></TR></TABLE>

as in power or what??

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by stock-gsr &raquo;</TD></TR><TR><TD CLASS="quote">sup guys im going to be building my first b20vtec.... ive allways had gsr motors.. but i want to go wit a bigger displacement....
what do i need to look for in this biuld????

old set up...
on my old gsr hatch (178hp-123trq) itm,h,e on uberdata don't ask me how but i did it... i ran 14.3@99.2mph wit a 2.6 60ft on street tires..

</TD></TR></TABLE>

check bolded text to see where you can improve on making your car faster without spending money. thats a pathetic 60ft even on street tires.

also you need to be specific about what youre asking here. what should you look for? what does that mean? you obviously have had some experience modding cars and understand that the b20 block bolts up to the gsr head, so what else do you need to know? changing pistons? frankenstein specific swap parts?(not many of them) you need to tell us your plans for the car, how much power you want, what gas youll be running, all this stuff is relevant and necessary in order to help you. so now its your turn.......

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by the_unknown &raquo;</TD></TR><TR><TD CLASS="quote">

check bolded text to see where you can improve on making your car faster without spending money. thats a pathetic 60ft even on street tires.

also you need to be specific about what youre asking here. what should you look for? what does that mean? you obviously have had some experience modding cars and understand that the b20 block bolts up to the gsr head, so what else do you need to know? changing pistons? frankenstein specific swap parts?(not many of them) you need to tell us your plans for the car, how much power you want, what gas youll be running, all this stuff is relevant and necessary in order to help you. so now its your turn.......</TD></TR></TABLE>

look dude like said let me know what to look for.... i didn't think that you need me to hold your hand on explaining and giving me some tips for my build.... i ask like that cause i asume that you guys were smart and you guys whould catch on... i ask h-t because i know h-t has alot of guys that have done this swap a bunch of time's.... frankenstein, changing pistons what ever i need to know let me know to see if im going to run to any trouble.... so don't be a dick about it because i wasn't spacific about things.. like h-t is good for helping people out wit what ever it is that they need h-t's help for.................



Modified by stock-gsr at 3:48 PM 10/8/2007

 

https://honda-tech.com/zerothread?id=1676914

thats an awesome thread. has all the info u need

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b20vtech &raquo;</TD></TR><TR><TD CLASS="quote">just throwing that b20 block on will get u down to low 13's for sure.... i use to have a stock *** b20vtec that ran 13.4 @ 103mph but with slicks...i mean stock.... stock b16 head stock intake, stock header, stock cam, stock TB, and the block is completly stock b20b block.... trans was a GSr with just a 6 Puck clutch just so i can use slick... and a getto chip ECU....... i miss it!!!</TD></TR></TABLE>

Did you have stock pistons in that b20, isnt that pretty low compression and how did you run that fast. im really curious now cuz i might want to do that.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by stock-gsr &raquo;</TD></TR><TR><TD CLASS="quote">

look dude like said let me know what to look for.... i didn't think that you need me to hold your hand on explaining and giving me some tips for my build.... i ask like that cause i asume that you guys were smart and you guys whould catch on... i ask h-t because i know h-t has alot of guys that have done this swap a bunch of time's.... frankenstein, changing pistons what ever i need to know let me know to see if im going to run to any trouble.... so don't be a dick about it because i wasn't spacific about things.. like h-t is good for helping people out wit what ever it is that they need h-t's help for.................

Modified by stock-gsr at 3:48 PM 10/8/2007</TD></TR></TABLE>

we're not ******* mind readers. "what do i need to look for in this biuld????" doesnt say jack ****. try searching next time before getting an attitude with someone.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by stock-gsr &raquo;</TD></TR><TR><TD CLASS="quote">look dude like said let me know what to look for.... i didn't think that you need me to hold your hand on explaining and giving me some tips for my build.... i ask like that cause i asume that you guys were smart and you guys whould catch on... i ask h-t because i know h-t has alot of guys that have done this swap a bunch of time's.... frankenstein, changing pistons what ever i need to know let me know to see if im going to run to any trouble.... so don't be a dick about it because i wasn't spacific about things.. like h-t is good for helping people out wit what ever it is that they need h-t's help for.................

Modified by stock-gsr at 3:48 PM 10/8/2007</TD></TR></TABLE>

if you werent such a moron u would have noticed i was being nice considering the position you put the rest of us in by not asking a proper question. i was trying to help you out but now i think ill let all the other "h-t guys who know alot" that are here trying to help take care of it. lets see where you get with questions like "what should i look for in building a motor?"

thanks doood some people just dont know how to help themselves.

edit: your 60ft still sucks

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by doood &raquo;</TD></TR><TR><TD CLASS="quote">

we're not ******* mind readers. "what do i need to look for in this biuld????" doesnt say jack ****. try searching next time before getting an attitude with someone.</TD></TR></TABLE>

LISTEN ******* I DIDNT GET AN ATTITUDE WIT ANYBODY.... WHAT THE *** DO YOU WANT ME TO SAY....... LET ME KNOW WHAT THE BEST BAG FOR BUCK IS IN ALL THE PARTS I HAVE TO GET.... LET ME KNOW THE SECRETS OR IDEAS YOU HAVE ON BUILDING A B20VTEC.........

******* **** ***'S USE THE ******* PIMPLE YOU HAVE IN YOUR HEAD'S...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by the_unknown &raquo;</TD></TR><TR><TD CLASS="quote">

if you werent such a moron u would have noticed i was being nice considering the position you put the rest of us in by not asking a proper question. i was trying to help you out but now i think ill let all the other "h-t guys who know alot" that are here trying to help take care of it. lets see where you get with questions like "what should i look for in building a motor?"

thanks doood some people just dont know how to help themselves.

edit: your 60ft still sucks </TD></TR></TABLE>

AND YOU YOU ******* MORON ILL RUN MY 60FT RIGHT IN YOUR ***...

LOOKING AT MY TIME SLIP YOUR RIGHT... (MY BAD) THAT DOES SUCK I REALY RAN A 2.2 ON STREET TIRES.
ILL POST IT ON HERE TOMORROW SO YOU CAN SEE.. I HAVE TO SCAN IT FIRST

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Anti-Drama Queens &raquo;</TD></TR><TR><TD CLASS="quote">https://honda-tech.com/zerothread?id=1676914

thats an awesome thread. has all the info u need</TD></TR></TABLE>

THANKS BROTHER IM WRIGHTING IT DOWN RIGHT NOW..

 

dont shout and you just might get a response you like. CAPS OFF ********!!!

p.s.
2.2 still doesnt impress. i think you should do a smokey burnout to "warm up" your street tires before you race, lol......

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by stock-gsr &raquo;</TD></TR><TR><TD CLASS="quote">
LET ME KNOW WHAT THE BEST BAG FOR BUCK IS </TD></TR></TABLE>



<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by stock-gsr &raquo;</TD></TR><TR><TD CLASS="quote">
IN ALL THE PARTS I HAVE TO GET.... LET ME KNOW THE SECRETS OR IDEAS YOU HAVE ON BUILDING A B20VTEC......... </TD></TR></TABLE>

Yea, and why shouldnt we list everything out for you and give away all our secrets? After all, you have been here a whopping total of 11 days!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by stock-gsr &raquo;</TD></TR><TR><TD CLASS="quote">AND YOU YOU ******* MORON ILL RUN MY 60FT RIGHT IN YOUR ***...
</TD></TR></TABLE>

hahaha, i almost have tears in my eyes laughing so hard... you are jackass comin in here asking vauge questions and then spouting off like a retard, but i must admit, this thread is humorous.

 

ahaha thats comedy right there, that is the best bag for the buck!

 

USE IT FAM!!!