I have a 92 Civic HB with a B-Series Motor fully built. My clutch is brand new-Xtreme Plate with a six puck unsprung disc. My old one was worn out so I had a brand new one installed. I took it to the track and I'm having a problem with my clutch. When I stage, stepping on the clutch all the way down and not letting go of the gas at 7000 rpm, it moves/creeps. I never had a problem before using the same brand. Checked the hydraulics and bled it after the install, everything is within specs. Any input will be greatly appreciated.

 

have you adjusted the pedal?

 

Yes.

 

bent pressure plate diaphram? happened to me before. pushed clutch all the way in and car still crept forward on its own. take it apart and check it. did you use a new throwout bearing?

 

is your flywheel milled to hell thats a possible issue or is it new?

 

It's a brand new act flywheel.

 

I bought the whole kit and installed new bearings.

 

sounds to me like a bad plate! is the slave or the master bad!