Vtec Problems *HELP*
Thread Starter
* B A N N E D *
Joined: Sep 2006
Posts: 243
Likes: 0
From: CT, USA
Vtec Problems *HELP*
I just swapped a 01 b18c1 into my 97 ek hatch and have everything besides my o2 sensors hooked up...
The problem is that Vtec will only crack about once or twice a ride.. As in if i do a vtec run may be 1st - 3rd in vtec and get off of it and then try to crack it again it doesnt and it redlines at 6600 vs 8000 when vtec does work...
Im using a p72 OBD2a the wires are not the problem, i had thought maybe there was a loose connection somewhere and that it would disconnect all the time, so i made a new sub harness and check it with a DMM and its fine...
If anyone can help me with any info you kcik ***
The problem is that Vtec will only crack about once or twice a ride.. As in if i do a vtec run may be 1st - 3rd in vtec and get off of it and then try to crack it again it doesnt and it redlines at 6600 vs 8000 when vtec does work...
Im using a p72 OBD2a the wires are not the problem, i had thought maybe there was a loose connection somewhere and that it would disconnect all the time, so i made a new sub harness and check it with a DMM and its fine...
If anyone can help me with any info you kcik ***
Thread
Thread Starter
Forum
Replies
Last Post