im doing an ls/vtec swap on my delso.had al the wiring connected n stuff but when
i start the car and rpm start shootin up it dont just go up n down but its shoot up n wouldnt stop till i shut off the engine....
and there's one plug that i couldnt figure out what it is ..its on the driver side all the way down to the bottom of the block....i think it must have somtin to do with the timing..
help plz !!!1

 

CPS? putting obd2 bottom end into obd1 car?

 

no engine is obd1 ....

 

and is it coming out like behind the crank pulleys? or...

 

yes its the cps , so is that the cause of the problem ?

 

i believe so, if you had a d series in stock, i believe the CPS sensor is located right near the Dizzy., Vs b series. and obd2 d series are also down by the crank.

 

ok then how am i gonna find that plug for that sensor but iono if it was obd1 or 2 and my obd1 harness just fit on every sensor ??

 

gotta get it wired up, does the plug look like this...

[IMG][/IMG] ??


Modified by DecentCivicZ6 at 5:54 PM 7/10/2007

 

yeah that's it

 

yeah, OBD1 D series did not have that obd2 d series does, and i believe all obd1 + B series have that plug down there...not 100% but think it needs to be wired in. someone will come thru the thread and know., Im using obd2 d series. but with obd1 head and dizzy, so i just leave mine hangin


Modified by DecentCivicZ6 at 9:04 PM 7/10/2007

 

so u been runnin w/out the cps ? is it gonna dmg ur engine ?