I have a 97 civic ex with a 92 b16 swap. I have put new drive axles(drive shafts) on both sides, I have also put new camber kits on the front with new upper ball joints. It also has older neuspeed lowing springs and kyb struts on all four wheels.

Heres the problem when I turn to the right the passenger side makes a claking noise when the wheel straightens back out it goes away. When I turn to the left there is no noise. Also the previous owner had big *** 18 inch rims on the car.
Im thinking the donka donk rims messed up my wheel bearing and that is where the clacking noise is coming from. Any other ideas before I replace the whole f-ing front end of this car? thanks

 

anyone?