h22 teg wont start after ecu harness was redone cel 20 wtf?
alright, everything is hooked up and we tried starting the car. turns over but doesnt start. no cel but plugged in the jumper and was throwing code 20 eld. checked all fuses and none of them were blown. any chance wires hooked up wrong would throw this code?
have spark and fuel. saw timing was off a tooth and fixed it, nothing. still wont fire up. checked all fuses. i dont have the srs plugged in nor the climate controls or headlights/blinkers. i heard that if srs isnt plugged in it may put the car in limp mode, but my bags are popped and it ran that way last year.
i was skeptical about the dizzy wiring so i cut those wires and ran my own straight from the dizzy to the ecu. so i no for a fact those are right. im kinda stuck
have spark and fuel. saw timing was off a tooth and fixed it, nothing. still wont fire up. checked all fuses. i dont have the srs plugged in nor the climate controls or headlights/blinkers. i heard that if srs isnt plugged in it may put the car in limp mode, but my bags are popped and it ran that way last year.
i was skeptical about the dizzy wiring so i cut those wires and ran my own straight from the dizzy to the ecu. so i no for a fact those are right. im kinda stuck
Thread
Thread Starter
Forum
Replies
Last Post




