Ok I am in the market for a Camber/Caster Kit

I have done the search on the site and read all the articles/threads that were pulled up, and found them very informative that is why I need some advice.

My first choice for a kit would be K-Mac's Camber kit and since no one knows the number or website for a US distributor i am SOL on that one, I am not going to order them from Australia and have it cost $400 for a $200 kit, but if it comes down to it I will.

I read on the Ingalls kit and have heard some personal testimony that some kits work and some don't so i am not really considering them but a I still keeping them in the back of my mind.

I hear skunk2 is good, however they have had some rubbing problems so I have heard. SO i dont know what to make of them.

My Question is does anyone have a suggestion on which kit i should get, does anybody have any personal expierence with various kits, I am just looking for a Camber/Caster kit that is going to work and not slip on me or cause my tire to rub.

Thanks for any help you can give me, and oh yeah I am the guy posting all over the board in search of the K-Mac information. Later guys...

 

ttt

 

Are you trying to dial out neg from dropping your car, or do you wish to add neg camber for track use?

 

well i want both...haha...I need to get rid of the negative camber for when i am on the streets but I still need to be able to put negative camber in the car, I am going to eventually make this a track *****, I autocross the car right now, and very soon its going to be put on an actaul track, VIR and so fourth...


[Modified by AcuraRacer112, 4:58 AM 6/3/2002]

 

putting it in and taking it out will take a lot of time and money since an alignment rack is required.

I would like some input as well though. I am looking for a setup that will allow both addition and subtraction of neg camber so I can even it up to an acceptab;e (-2 degrees) street/track setup. RIght now some have too much and some have too liitle.

 

i also need a kit to dial out neg..any suggestions would be appreciated

 

well Guys i think i am going with skunk2...i have been doing some research, they have had a few problems with the old design slipping and what have you. but they are the best ones that I can find, I know of some others like K-Mac wich would be my number one choice, great reliablity above all, King, SP, and others but honestly for the money they [skunk2] is probably the better of whats avaiable...you know the lesser of all evils...
some research
https://honda-tech.com/zerothread?id=192378 Skunk2 thread
https://honda-tech.com/zerothread?id=188033 Skunk2 thread
https://honda-tech.com/zerothread?id=186338 Skunk2 thread
https://honda-tech.com/zerothread?id=189337 Skunk2 thread

and so on...let me know what you guys think, i am going to order them this afternoon or tomorrow

 

I was thinking skunk2 was a good design as well. I am typically a non skunk2 supporter but their design is almost exactly like King Motorsports design except for material and true to form the King parts cost 2 times as much. Mind you the King parts are NOT mugen stuff and don't have all the import fees the rest do so they are nicer material but they are making a killing.

King does have a sweet rear camber adjustment kit.
http://www.kingmotorsports.com/produ...g/rear_uca.jpg

 

Damn the king stuff does look nice...ehhh what do i do....god damn could this be any harder???