Does anyone know what the compression height of the F20C pistons?

Deck height of the F20C block?

Do they differ between the F20C and F22C?

Any information would be greatly appreciated. I've searched but did not find any relevant information pretaining to those specs.

 

BTT

 

BTT

 

f20c is 30 mm .. thats pin hole to the deck of the piston.. i open up my engine just to answer your question.. now send me f22c and ill measure it for you.. rofl

 

ohh i missed the other question..

f20c and f22c has the same 8.815" Block Height and the same 87mm Bore but different stroke (f20c 84mm, f22c 90.7mm stroke)

may i know why you ask?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FR-MOB: Jerk &raquo;</TD></TR><TR><TD CLASS="quote">f20c is 30 mm .. thats pin hole to the deck of the piston.. i open up my engine just to answer your question.. now send me f22c and ill measure it for you.. rofl </TD></TR></TABLE>

Thank you very much. That was exactly what I was looking for.

Wanted to confirm that the F20C pistons had 1mm less compression height compared to the H22 pistons. And if the F22/F20 differ in compression/deck height.

 

ahhh doing the H22 2.4 stroker... lol

goodluck..

 

Just crunching some numbers, that's all . Thank you for the info!

 

well, crunch it good and make sure pop some advil before you get headache... rofl

 

yea its a mix and match between the 2 set ups... H series needs what it can since its the only thing that can compete with the K series N/A wise

 

bb_one, are you fly_s2k in s2kca? lol

only h-t where you get the answer..

 

Yes sir, you spotted me. Unfortunately you are correct. I ask and ask and ask, but the only place I get real useful information is on Honda-tech. Besides the band-wagoning and haterism, HT is a great place for info.

I am also fly_S2K on s2ki, in which my answer DID NOT get answered either.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by S@nt0s &raquo;</TD></TR><TR><TD CLASS="quote">yea its a mix and match between the 2 set ups... H series needs what it can since its the only thing that can compete with the K series N/A wise</TD></TR></TABLE>

make that 3... K24 crankshaft, H22a (connecting rod, bearing, and piston), f20c block and head...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bb_one &raquo;</TD></TR><TR><TD CLASS="quote">I am also fly_S2K on s2ki, in which my answer DID NOT get answered either.</TD></TR></TABLE>

boy thats a shocker to me..... it didnt get answered there because they are all about what looks HOT THIS MONTH.....
i think in this S2K forum we are pretty enlightened peeps who get our hands DIRTY

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bb_one &raquo;</TD></TR><TR><TD CLASS="quote"> Besides the band-wagoning and haterism, HT is a great place for info.
</TD></TR></TABLE>

Anarchy rules.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr. Projekt &raquo;</TD></TR><TR><TD CLASS="quote">

Anarchy rules. </TD></TR></TABLE>
***** BUSH

 

yeah!!! shaved is better... ohhh.. ur talking about the president?

 

shaved OWNS!
Shaving time of your 1/4 and lap that is...