Official B16 Boost Thread
Thread Starter
Honda-Tech Member
Joined: Jul 2004
Posts: 4,860
Likes: 0
From: Hill town, TN, USA
Official B16 Boost Thread
So I know there use to be a thread.
I tried searching recent and backburner threads but didnt find it.
Lets make this the Post your setup, Pictures and Discuss Everything to do
with B16 Boosted Motors.
I cant start off Becuase Im currently trying to peice together a kit.
I tried searching recent and backburner threads but didnt find it.
Lets make this the Post your setup, Pictures and Discuss Everything to do
with B16 Boosted Motors.
I cant start off Becuase Im currently trying to peice together a kit.
Junior Member
Joined: Oct 2006
Posts: 218
Likes: 0
From: umea, sweden
Re: Official B16 Boost Thread (Jose-aka-Pedro)
i can start 
a crx vtec
b16a1 t3/t04 47 trim 3" downpipe 3" exhaust
ported cylinderhead. itr cams. 2,5" intercooler piping
ebay manifold, 38mm wastegate
550cc injectors CP pistons and eagle rods
arp headstuds
62mmTB
apexi vafc2
i had som friends of min to tune it in. they puted a chip in the box and tuned the fuel and ignition there and tuned som more on the apexi vafc2
i am boosting 15psi
a crx vtec
b16a1 t3/t04 47 trim 3" downpipe 3" exhaust
ported cylinderhead. itr cams. 2,5" intercooler piping
ebay manifold, 38mm wastegate
550cc injectors CP pistons and eagle rods
arp headstuds
62mmTB
apexi vafc2
i had som friends of min to tune it in. they puted a chip in the box and tuned the fuel and ignition there and tuned som more on the apexi vafc2
i am boosting 15psi
Honda-Tech Member
Joined: Sep 2003
Posts: 2,322
Likes: 0
From: MD
Re: Official B16 Boost Thread (LoSt is BlaCk)
567whp 351ft lbs stock sleeve b16
10.45@142.7mph
Stock sleeved b16
je pistons/eagle rods
Full-race t3/t67ho
gsr trans open diff stock axles
2350 with driver
10.45@142.7mph
Stock sleeved b16
je pistons/eagle rods
Full-race t3/t67ho
gsr trans open diff stock axles
2350 with driver
Honda-Tech Member
Joined: Dec 2004
Posts: 2,636
Likes: 0
From: Chicago area, us
Re: Official B16 Boost Thread (Boner_Ben)
that COP looks so clean.
My new setup
81.50mm B16A2
Wiseco pistons
Eagle rods
stock crank/sleeves
Stock head with performance valve job, stock IM/TB/cams
Custom log with a 38mm
t3/t4 .63
3in dp
Clutchmasters stage 5, 8lb flywheel
525cc injectors
Neptune
Looking for 380 on pump as long as the injectors dont max(which i am sure they will)
Hoping to go 11.7's in a full trim'd 99 SI
My new setup
81.50mm B16A2
Wiseco pistons
Eagle rods
stock crank/sleeves
Stock head with performance valve job, stock IM/TB/cams
Custom log with a 38mm
t3/t4 .63
3in dp
Clutchmasters stage 5, 8lb flywheel
525cc injectors
Neptune
Looking for 380 on pump as long as the injectors dont max(which i am sure they will)
Hoping to go 11.7's in a full trim'd 99 SI
Thread
Thread Starter
Forum
Replies
Last Post
