okay somebody please help me install an autometer tach theres 4 wires.. ground and power i get that.. one goes to tach.. i want to go thru the ecu or can i do it from the dizzy.. do i splice it in.. or cut the wire and tie it all together with tape? what about the one thats 12v ignition switch can ithat go to battery?


what about the white wire that goes to 12 v dash light where do i find that wire at.. thanks..

 

nobody? wow........

 

come on this is serious

 

don't even try it if you don't know how to solder

solder/heat shrink wrap/e-tape

 

i can't use electrical tape?

 

you CAN use tape but why wouldnt you want a strong splice. Soldering is best, and if you cant do that crimp them.

 

got it done.. thanks alset..