i am looking for some suggestions as to what to go with it is a itr block with b16 head i have a polished and balanced crank from my old ls vtec this car is going to be running 10 pounds daily help me out let me know what you guys are running and how they are working for You. Thanks

 

if u want a cheap setup, eagles with mahle's are hella cheap and work well/reliable

if u wanna buck up, manley rods with arias/cp etc..

 

eagle/cp should be a perfect combo for you.

for 10 pounds manley is pretty well overkill. it won't hurt you, but it's another 300 bucks you could spend elsewhere.

 

eagle/cp


Modified by bootlegcivic at 7:10 PM 9/28/2006

 

Eagle/wiseco I'm not a fan of the 81.5 mm CP's, the intake valve reliefs near the cylinder wall are razor thin and tend to melt. I've personally seen it on two local cars. Arias pistons are also very good but heavier than the wiseco's.

 

thanks for your suggestion keep them comin