FS: Precision SC-4431E
Hey im posting for a buddy so if you have any quesitons ask me and i'll get back to you ASAP. This info came from him also.
Rated HP – 565 Horsepower
Part No. - PTE SC-4431E
Compressor Wheel Diameter – 58mm
Compressor Wheel Inducer - 2.290”
Compressor Wheel Exducer – 2.950”
Wheel Trim – 60 Trim
Compressor Cover Inlet – 3”
Outlet Size – 2”
Bearing System – PTE Race 360 Center Section
Turbine Housing A/R Ratio - .48
Turbine Wheel Style - T31 (Stage III)
Turbine Wheel Inducer – 2.559"
Turbine Wheel Exducer – 2.228"
Turbine Wheel Trim - 76
Now we are getting somewhere! This is a 60 trim turbo, NOT A 60-1. This turbo is a great pump gas turbo that likes to run a decent amount of boost. The power of this turbo is decent in the down low, while the top end is something that can only be described as AWESOME!
T3 60trim w/ stage 3 wheels
2,000 miles
$650 shipped
345FWHP @ 17psi untuned Eclipse RS
Selling for bigger turbo.
Rated HP – 565 Horsepower
Part No. - PTE SC-4431E
Compressor Wheel Diameter – 58mm
Compressor Wheel Inducer - 2.290”
Compressor Wheel Exducer – 2.950”
Wheel Trim – 60 Trim
Compressor Cover Inlet – 3”
Outlet Size – 2”
Bearing System – PTE Race 360 Center Section
Turbine Housing A/R Ratio - .48
Turbine Wheel Style - T31 (Stage III)
Turbine Wheel Inducer – 2.559"
Turbine Wheel Exducer – 2.228"
Turbine Wheel Trim - 76
Now we are getting somewhere! This is a 60 trim turbo, NOT A 60-1. This turbo is a great pump gas turbo that likes to run a decent amount of boost. The power of this turbo is decent in the down low, while the top end is something that can only be described as AWESOME!
T3 60trim w/ stage 3 wheels
2,000 miles
$650 shipped
345FWHP @ 17psi untuned Eclipse RS
Selling for bigger turbo.
Thread
Thread Starter
Forum
Replies
Last Post
stizzit
Forced Induction
7
Sep 6, 2004 07:20 PM




