Heres The Deal I Just Finished My Boys swap We Put A Jdm B16a and Converted To Obd1 with A kenji Chipped ecu . The Car Idles And Sound Fine but at around 3500 hundred rpms it falls on its face . and it only does it at half throttle not full throttle .. any comments would greatly appreciated..

 

bump common somebody on here has to no something that can help me out

 

try a regular ecu, dont need a chipped one when its all stock.

 

its not stock it has bbk 70mm tb,aebs intake mani ,type R header ,rsr exhaust and cat ,and inline fuel filter and msd 6al. and its not throwing and check engine light

 

tried a stock ecu still doing the same thing

 

Check you TPS reading to make sure its correct, you can also switch out the MAP sensor or run it from a differnt location to get a more accurate reading.

 

What car (model, year) did you do this B16A swap in and conversion to OBD1?

 

its a 96 civic dx Hatchback

 

bump i checked the tps readings and they are normal and i switch out the map sensor to a different lacatrion and its still doing the same thing. anybody else got any ideas

 

bump i know somebody has to have some experience with the bbk throttle bodys cuz it started doin it when we put the throttle body on