I have secrched this topic and have no positive answer. There is a write up on abs removal in a lude. Is it relitivly the same? Also, there is talk about needing some other parts. Can't I just remove the lines w/o crimping the old abs lines?

Anyone know of a write up out there I can follow?

The reason for this is b/c I am doing a H22 swap. I would have to get non-abs axles, and all I would get is a brake light and be fine? right?

 

Two ways to do it:
All OEM: Hard lines, prop valve, MC, and booster from a non-ABS RS Integra.
1/2: 2 of the front hard lines and the pop valve from the non-ABS RS. Make the other 2 lines yourself to fit the GSR MC.
Taken from:https://honda-tech.com/zerothread?id=1428726

Looks like a good thread - https://honda-tech.com/zerothread?id=475369

https://honda-tech.com/zerothread?id=1257623

Ali