im looking for a set of cams to help out my midrange and topend. I have a stock b16a2 motor w/ a sc34 a/r 48 and blox manifold and 3" dp. I am wondering what would be the best selection for my setup. I would like to hear more opinions on the BLOX since i have the manifold and have had no problems w/ them. I think they are a great company and produce very good products.

 

d-sport had the blox A's on a gsr with the peak boost kit, I believe, and the curve looked peaky, but they made like 330 stock motor with blox a cams. I would personally go with the type r cams.

 

any other suggestions?

 

skunk2 stage 2

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dturbocivic &raquo;</TD></TR><TR><TD CLASS="quote">skunk2 stage 2</TD></TR></TABLE>

dont u lose power w/ those cams

 

I think you would lose hp with the cams as they have alot of overlap, but if you want I have blox b's for sale. lol

 

i say keep it simple stick with ITR/CTR cams they are proven time and time again.

 

yep there itr graphs all over this site. they make power. not sayin the other ones wont but itr's are proven

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by XxRoCkMaNxNEOxX &raquo;</TD></TR><TR><TD CLASS="quote">

dont u lose power w/ those cams</TD></TR></TABLE>

The adspeed coupe made 535 WHP at 19 psi on an 84mm GSR motor with skunk2 stage 2's. That's the most i've ever seen at that boost level from a GT35R. I'm going to go ahead and say NO.

 

just dropped in .. no tuning i lost 15 torque but gained 20 WHP up top all teh way to 10K VS the ITR's with blox B's in my turbo car


337 @ 10 psi street tune

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by XxRoCkMaNxNEOxX &raquo;</TD></TR><TR><TD CLASS="quote">dont u lose power w/ those cams</TD></TR></TABLE>

no. they are great for high hp applictions. and from what the other guy posted. they ork beautifly on street apps too.

its like someone telling you gsr's are "better" than itr/ctr's

James Innes/John F made some big power with "all motor" cams last season.


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tokes1320 &raquo;</TD></TR><TR><TD CLASS="quote">The adspeed coupe made 535 WHP at 19 psi on an 84mm GSR motor with skunk2 stage 2's. That's the most i've ever seen at that boost level from a GT35R. I'm going to go ahead and say NO.</TD></TR></TABLE>

 

not to turn this into a classified FOR sale POST.. but i have brand new BLOX turbo cams DIRT CHEAP .. i decided to use ITR/CTR combo.. pm me if interested.....


matter of fact check your PM ..

 

anything on blox turbo cams?

 

https://honda-tech.com/zerothread?id=1288539


^ that was on a GSR with blox turbo cams...But there were some other threads of ITR/CTR cams vs Turbo cams comparisons which showed oem cams kicks ***!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by XxRoCkMaNxNEOxX &raquo;</TD></TR><TR><TD CLASS="quote">anything on blox turbo cams?</TD></TR></TABLE>


junk

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dturbocivic &raquo;</TD></TR><TR><TD CLASS="quote"> junk </TD></TR></TABLE>

u tried em?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by XxRoCkMaNxNEOxX &raquo;</TD></TR><TR><TD CLASS="quote">

u tried em?</TD></TR></TABLE>

There have been dynos of them posted, they seem to speed up spool just a little bit, but then top end power is hurt pretty significantly.