Im building my h22 and wondering what headgasket i should run, copper? etc... I have JE 9:1 pistons (i sleeved it) and running about 17psi, thanx

 

OEM headgasket

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TheKINGPin &raquo;</TD></TR><TR><TD CLASS="quote">OEM headgasket </TD></TR></TABLE>

?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Matt5745767 &raquo;</TD></TR><TR><TD CLASS="quote">

?</TD></TR></TABLE>

...........Many people that boost use the OEM headgasket - they get a new one of course. But they haven't had any problems. I'm assuming your 'statement' was in call for an explanation.

 

i would just assume if he's going to run 17psi not to use an OEM head gasket

 

i dunno, OEM sounds kinda scary

 

OEM Honda is all you need. I've ran several 500+whp set-ups using stock gaskets.


Here is one I did today:

https://honda-tech.com/zerothread?id=1538207

 

I have a stock head gasket going on my built motor. I have heard good things about them when coming to boost

 

Ok, thanks for the help

 

what sleeves did you use?