I'm wondering what size piping is sufficient? The compressor inlet is 2 1/4" in diameter, so would a 2 1/4" diameter pipe be enough? Get a 90 degree bend off the compressor, point it up and throw on a filter?

Could someone provide me with the pipe size and a corresponding filter?

Thanks for your help.

 

I'd try to locate the filter further away from your exhaust manifold. You dont wanna be sucking up all that hot air.

Get yourself a 45* mandrel bend, and a 45* silicon coupler (vibrantperformance.com) you can then route your pipe to teh stock location. I'll take some shitty camara/phone pics when it gets light out. (im a west coaster)

 

Thanks for the tip, I'll try and put the filter in the coolest place possible.

But I'm still wondering what diameter piping will be sufficient. I don't want over kill because space is limited, but I also don't want something that will cause a bottleneck. I need something that's juuust right.

 

My inlet is 2.75" I used 3" piping and silicon