Act 6 puck clutch and extreme pp?
Mine has been working great for the last year.
T3/T67
Fully Built LS/VTEC with 9:1 CR
Quaife LSD...etc
Making ~450whp @ 17psi
No signs of slipage. I do not launch very hard and I preload the drivetrain each time.
T3/T67
Fully Built LS/VTEC with 9:1 CR
Quaife LSD...etc
Making ~450whp @ 17psi
No signs of slipage. I do not launch very hard and I preload the drivetrain each time.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LST2 »</TD></TR><TR><TD CLASS="quote">Mine has been working great for the last year.
T3/T67
Fully Built LS/VTEC with 9:1 CR
Quaife LSD...etc
Making ~450whp @ 17psi
No signs of slipage. I do not launch very hard and I preload the drivetrain each time.</TD></TR></TABLE>
nice one, thats exactly like my setup apart from mine's a gsr.
Do you notice a slight screaching noise comin from the clutch when the cars cold when engaging the clutch?? could be my alumium flywheel
T3/T67
Fully Built LS/VTEC with 9:1 CR
Quaife LSD...etc
Making ~450whp @ 17psi
No signs of slipage. I do not launch very hard and I preload the drivetrain each time.</TD></TR></TABLE>
nice one, thats exactly like my setup apart from mine's a gsr.
Do you notice a slight screaching noise comin from the clutch when the cars cold when engaging the clutch?? could be my alumium flywheel
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hotimportcrx »</TD></TR><TR><TD CLASS="quote">like when u let off the clutch...you hear ..ERR ERR ERRR...like a screach....if so thats clutch chatter...and all 6 pucks do it</TD></TR></TABLE>
yea thats right, my previous 6 puck did it too, but it was when it was on its dying stages.. so ive been getting worried thinking maybe the Act clutch is on its way out too.
yea thats right, my previous 6 puck did it too, but it was when it was on its dying stages.. so ive been getting worried thinking maybe the Act clutch is on its way out too.
Thread
Thread Starter
Forum
Replies
Last Post



