Vtec Not Engaging Properly .... NEED HALP ASAP !!! Already searched with no luck
Thread Starter
Joined: Oct 2005
Posts: 1,172
Likes: 0
From: Los Angeles, CA, USA
Vtec Not Engaging Properly .... NEED HALP ASAP !!! Already searched with no luck
Hey Guys,
On my way home from class, i wanted to test vtec just to make sure everything was A OK. anyways, i am used to engagement at 5,500 rpm, it didn't engage until about 6,700 RPM. I then stopped, and tried again, this time, it didn't engage at all. I went straight home, checked oil and the oil is perfectly clear with about 2000 miles and filled properly. i then check connections to the vtec selonoid and everything seem fine. I REALLY NEED HELP TO GET THIS FIXED. ANY AND ALL ADVISE IS GREAT.
Background info:
B16a2 w/ about 40K miles in a Del Sol
I/E/H, B&M FPR, etc...
Thanks in advance for the help
On my way home from class, i wanted to test vtec just to make sure everything was A OK. anyways, i am used to engagement at 5,500 rpm, it didn't engage until about 6,700 RPM. I then stopped, and tried again, this time, it didn't engage at all. I went straight home, checked oil and the oil is perfectly clear with about 2000 miles and filled properly. i then check connections to the vtec selonoid and everything seem fine. I REALLY NEED HELP TO GET THIS FIXED. ANY AND ALL ADVISE IS GREAT.
Background info:
B16a2 w/ about 40K miles in a Del Sol
I/E/H, B&M FPR, etc...
Thanks in advance for the help
Thread
Thread Starter
Forum
Replies
Last Post
