hey guys i'm new to the forum. i'm justin and i'm hoping yall can help with something. i'm going to install a tach in a 95 civic with a 1.5 motor. the car doesnt have a tach from the factory. where do i need to run the tach from on this model car? i would think the coil or the ecu but i'm not familiar with these kinds of cars at all. thanks for the help.

 

get a wiring diagram that will help

 

You could always just go out and get a cluster with a tach....plug and play....and a much cleaner look IMO.

 

yeah that too like an si or ex one

 

yeah that would be a good idea but my friend already got a tach and when i install it hes gonna give a me a cd player. so i need to figure it out,. thanks for the info

 

the blue wire coming from the distributor is the tach wire. It is on your i.c. plug, just not used

 

just use the signal wire near the brake booster.........alot easier

 

yeah that test wire is very easy. it should be taped on to the harness and very easy to locate. next to the brake master cylinder

 

thanks alot guys i'll give it a try and let yall know how it goes
maybe even some pics

 

ok i got the tach installed tonite. it looks good and works good. thanks for the help. i used a wire near the firewall on the drivers side. thanks again for the help.