minimal shaft play, may need one seal, smokes just a bit after hard run. $250

 

Do you have any pix and do you know what flanges are on this?

 

PICTURES?????????????????

 

I don't have pics, but the flange is the same size as a t3, I matched them up, they are exactly the same and the turbo is very, very clean, just smokes a lil after, a hard highway run like 15 sec.

 

how did this thing spool, what power levels will it support, etc etc/

 

spools more like a 18g then a t3/t4............ it is loud, power is similar to 57/60 trim t3/t4e housing, not b!!, most people that look at the 20g compressor map, say it will do 420 whp plus on b-16 or b-18's more on 2 liters.

 

will that turbo bolt up to my 18g setup??

 

not sure, don't think so

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by iluvboost &raquo;</TD></TR><TR><TD CLASS="quote">will that turbo bolt up to my 18g setup??</TD></TR></TABLE><TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by senior boost &raquo;</TD></TR><TR><TD CLASS="quote">not sure, don't think so</TD></TR></TABLE>
i dont think it will. as senior was saying earlier. <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by senior boost &raquo;</TD></TR><TR><TD CLASS="quote">I don't have pics, but the flange is the same size as a t3, I matched them up, they are exactly the same and the turbo is very, very clean, just smokes a lil after, a hard highway run like 15 sec.</TD></TR></TABLE>
18g is a t-25/t-28 flange

 

Uban is right, 20g flange is larger, thanks


Modified by senior boost at 3:40 PM 6/1/2005

 

bump for a good price, new ones are around
1k or so.

 

ttt