OBD2a to OBD1 conversion harness question
Thread Starter
Honda-Tech Member
Joined: Aug 2004
Posts: 1,694
Likes: 0
From: Scarborough, Ontario, Canada
OBD2a to OBD1 conversion harness question
if im using an OBD1 ECU in my OBD2a (originaly auto) EK do i need to re-pin the IACV at the ecu plugs or does the conversion harness take care of that?
Honda-Tech Member
Joined: Mar 2001
Posts: 2,708
Likes: 1
From: Phoenix, AZ, USA
Re: OBD2a to OBD1 conversion harness question (scarlemthug)
Actually, you would need to change your IACV wiring to the same as all EK's with a 2 wire IACV, which involves moving the pin from A12 to A14 or vice versa (can't remember off the top of my head)..
Thread Starter
Honda-Tech Member
Joined: Aug 2004
Posts: 1,694
Likes: 0
From: Scarborough, Ontario, Canada
Re: OBD2a to OBD1 conversion harness question (locash)
i know i need to convert my auto EK's 3-wire plug to a 2-wire but im wondering if the conversion harnesses use A14 for the IACV connection or A12.
Thread
Thread Starter
Forum
Replies
Last Post
