what did you have to do (cat/test pipe) wise to make it fit?

was there an extention required to make it fit? i have part #s b130 and c130

 

I got a test pipe put inbetween the downpipe and the exhaust, it cracked in two days. Then got a flex pipe put in and it's holding up just fine so far.

 

how long was your test pipe?

 

i had a testpipe put inbetween my dp and exhaust and it worked fine

 

ok guys, thanks for the replies but i need to know how long it was so i can see if thermal sent me the wrong b-pipe

 

i ordered the downpipe back kit.. it fit fine... just had to order the flange and gasket

 

i think i am just going to go have a section of flex pipe installed to extend the test pipe so it will fit

or

 

 

The pipe was about a foot and a half, but not exactly sure just estimating.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nzrnk &raquo;</TD></TR><TR><TD CLASS="quote">The pipe was about a foot and a half, but not exactly sure just estimating.</TD></TR></TABLE>

i had mine made for 17.5 inches (stock length) and it was 3-4inches short