anyone have success with this company?...Yes I have researched and yes I have read many many many many negatives from their products..But I wanna hear about the few that had success...


**Please dont post anything negative..really only want to read the success stories

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tphan4 &raquo;</TD></TR><TR><TD CLASS="quote">

**Please dont post anything negative..really only want to read the success stories</TD></TR></TABLE>

Many people do have success if you just do the right things to ensure their products will last. I have a friend running the SSAC manifold on a drag car, after doing the right things to it, bracing it and opening up the wastegate flange, it has held up fine.

But I think that the negatives out weigh most of the positives with this manifold. Some of their other products are ok, like the BOV and wastegate. Haven't heard many complaints about them.

 

9lbs daily, no breaks

 

Just brace their manifold, and take apart their wastegate, and loctite each of the bolts.

 

11 lbs all the time, no bracing, no cracks.......... just run a flex pipe in your exhaust and itll be ok. by the way a point that i have been wanting to make is that.... with the price of this manifold you know that a ton are being bought, and to only hear a few complaints isnt to bad. and some of the complaints are bogus, for example, taking of the collector turning it to a different angle and welding it back with crappy welds and it braking on your welds, or beating the **** out of it trying to get it to break, and then finally the wastegate port falls off. i believe more people use these manifolds then you think, they are just afraid to say they are because people, like most on here, will give then hell for buying a manifold that didnt cost $700

 

ive been pushing 12 lbs, and everything has been good.