trans noise...
Thread Starter
Joined: Nov 2004
Posts: 6
Likes: 0
From: Los Angeles, CA, USA
trans noise...
1994 Civic EX D16/5speed...
So I've gotta a noise coming from my trans. It's mild and faint when in neutral, but goes away completely when I push the clutch in.
When in frst, second, third, or fourth, it's usually there, sorta like a mild/medium rumbling or scraping sound. In fifth, on the freeway, I can't hear it at all.
Sometimes when going through the gears, I don't hear it at all until 3,000 RPMS and up, but usually it's there and noticeable as soon as I let off on the clutch.
The gearbox is silky smooth in operation at all times, so I'm kinda stumped.
I realize that I'm probably not going to know for sure what it is until I pull the gearbox, but I was hpoping to hear some experience, strength, and hope from others as a way to guide me...
So I've gotta a noise coming from my trans. It's mild and faint when in neutral, but goes away completely when I push the clutch in.
When in frst, second, third, or fourth, it's usually there, sorta like a mild/medium rumbling or scraping sound. In fifth, on the freeway, I can't hear it at all.
Sometimes when going through the gears, I don't hear it at all until 3,000 RPMS and up, but usually it's there and noticeable as soon as I let off on the clutch.
The gearbox is silky smooth in operation at all times, so I'm kinda stumped.
I realize that I'm probably not going to know for sure what it is until I pull the gearbox, but I was hpoping to hear some experience, strength, and hope from others as a way to guide me...
Honda-Tech Member
Joined: Jan 2002
Posts: 15,334
Likes: 1
From: Raleigh, NC
Re: trans noise... (calipornya)
Input shaft bearing.
BauleyCivic did a writeup on removing the old one and installing a new one.
Here's the thread for you:
https://honda-tech.com/zerothread?id=596873
I'm a nice guy.
EDIT: I've replaced this before. Make sure you order the bearing from Honda. I ordered 3 different bearings from Advance Auto Parts and they still couldn't get it right.
BauleyCivic did a writeup on removing the old one and installing a new one.
Here's the thread for you:
https://honda-tech.com/zerothread?id=596873
I'm a nice guy.
EDIT: I've replaced this before. Make sure you order the bearing from Honda. I ordered 3 different bearings from Advance Auto Parts and they still couldn't get it right.
el diablo
Joined: Aug 2002
Posts: 7,178
Likes: 2
From: Colorado
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ricey McRicerton »</TD></TR><TR><TD CLASS="quote">Input shaft bearing.</TD></TR></TABLE>
yup.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ricey McRicerton »</TD></TR><TR><TD CLASS="quote">I'm a nice guy.</TD></TR></TABLE>
Itll be nice when you come down and drink some
yup.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ricey McRicerton »</TD></TR><TR><TD CLASS="quote">I'm a nice guy.</TD></TR></TABLE>
Itll be nice when you come down and drink some
Thread
Thread Starter
Forum
Replies
Last Post