I got a new CF hood, and my original squiters didnt fit in it so i bought some of those bolt on led ones, but they make the whole car just look like trash, so anyone have any ideas on what i can do?

 

Drill the holes out a little more so your stockers will fit.

 

trim the oem style to fit, using a spare set if you have them

or make a template of the hole, go to a junkyard and find some off another car that fit

 

I unfortunately don't have squirters on my hood. It was like this when i bought it, and I'm not drilling into the hood, I know that I would screw it up. It's not that big of a deal. Just go to the gas station once in awhile & use teh squeegee.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ricey McRicerton &raquo;</TD></TR><TR><TD CLASS="quote">Drill the holes out a little more so your stockers will fit. </TD></TR></TABLE>what he said.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DJ_SaNdOz &raquo;</TD></TR><TR><TD CLASS="quote">I unfortunately don't have squirters on my hood. It was like this when i bought it, and I'm not drilling into the hood, I know that I would screw it up. It's not that big of a deal. Just go to the gas station once in awhile & use teh squeegee.</TD></TR></TABLE>

I'm not sure if any Honda's utilize them, but you can get squirters that go down in the cowl area.

 

Be very careful not to make the hole too big. I used a file.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ricey McRicerton &raquo;</TD></TR><TR><TD CLASS="quote">Drill the holes out a little more so your stockers will fit. </TD></TR></TABLE>

nuff said. mine were tight but the went in with a little coaxing.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ricey McRicerton &raquo;</TD></TR><TR><TD CLASS="quote">

I'm not sure if any Honda's utilize them, but you can get squirters that go down in the cowl area. </TD></TR></TABLE>

I've thought about that, but I'm a lazy bastage lol. I've been meaning to replace my tranny for two months, my heater doesn't work b/c I've been too lazy to hook up the cable again, I suck lol. I need to get of my duff this weekend.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DJ_SaNdOz &raquo;</TD></TR><TR><TD CLASS="quote">

I've thought about that, but I'm a lazy bastage lol. I've been meaning to replace my tranny for two months, my heater doesn't work b/c I've been too lazy to hook up the cable again, I suck lol. I need to get of my duff this weekend.</TD></TR></TABLE>

I'm in the same boat as you. I've been needing to adjust my valves for months now. That and run some seafoam through the car. Just make a checklist and do it all at once.

 

rig something up... like to come out under your hood. but on the windshield. like small metal tubing.

 

Sell me your old nozzles, I would give my left nut for oem nozzles again. (Had the unfortunate experience of buying my car from a ricer)

 

i put cf hood on my buddy's neon and drilled a hole then used a small file to make the hole the same shape as stock pissers

 

Just paint the led's

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ricey McRicerton &raquo;</TD></TR><TR><TD CLASS="quote">Drill the holes out a little more so your stockers will fit. </TD></TR></TABLE>

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ricey McRicerton &raquo;</TD></TR><TR><TD CLASS="quote">

I'm not sure if any Honda's utilize them, but you can get squirters that go down in the cowl area. </TD></TR></TABLE>

2003 and up Accords have them in the cowl area....

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 93CivicSI &raquo;</TD></TR><TR><TD CLASS="quote">

2003 and up Accords have them in the cowl area....</TD></TR></TABLE>

Really? Hmmmmm....that could be helpful.

 

they are on the cowl on dc integras.

 

That's still ugly because you'll have a huge lump for squirters if you paint over them.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BlueIntegraBoy &raquo;</TD></TR><TR><TD CLASS="quote">That's still ugly because you'll have a huge lump for squirters if you paint over them.</TD></TR></TABLE>

Huh?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by zseeanz &raquo;</TD></TR><TR><TD CLASS="quote">Just paint the led's</TD></TR></TABLE>

I was supposed to quote ^^^. The LED squirters are fat and it you paint over them, it'll still look shitty.