My friend has a CTR front end he's putting on his 97 hatch. Everything is on except the bumper. Could somebody give me a detailed expanation on how to install it. I searched a little bit, but don't know anything about civics, so I was completely sure on what to search for. Any help would be great, thanks.

 

What year CTR? If it's a 96-98 he may as well just swap the grilles, headlights and lips.

If it's a 99-00 do it the same as you would any other 99-00 Conversion.

 

It's a 99-00. So how do you do a 99-00 conversion then?

 

It's in the FAQ thread. I really don't feel like tracking it down tonight.

 

I found one link on how to do it, but it wasn't detailed at all. Just basically showed the car without the old stuff, and with the new stuff.

 

Pretty much unbolt the old stuff and rebolt the new stuff. There's a lot of debate on wether you need the bumper support, but some people just trim it to make it fit correctly.

 

So you don't have to drill any new holes or anything?

 

i know a guy in VA that had to cut off his rad support just to get the 99 front end to fit on a 96 body... thats weird. Ive done it twice and never did that before...
No drillin or nething... just complete bolt on...

 

Yes we have done this thread before. a 99-00 front end conversion needs the 99-00 Hood, bumper, headlights, AND fenders.

 

you will also need the 99-00 radiator support if you want a clean conversion. however you can still do it without a 99-00 radiator support, but you'll have to modify the bumper.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Redline96LX &raquo;</TD></TR><TR><TD CLASS="quote">Yes we have done this thread before. a 99-00 front end conversion needs the 99-00 Hood, bumper, headlights, AND fenders.</TD></TR></TABLE>

Wow, you are an idiot. If you don't have anything to add to the thread, stay the **** out. I know what you need, I believe I asked how to do it.

 

Thanks everybody else for your help. Does anybody by any chance have a link on how to do it?

 

shouldnt everything just bolt right up?

 

have you even tried installing it yet?

 

No, I haven't since it's not my car, if you actually read what I wrote. Please don't post unless you have something useful to add.

 

Heres something useful.....you are an idiot and need to lay off the attitude when people are trying to help you.

 

if you took the old bumper off how can you not understand how to put the new bumper on ? I don't think anyone even knows what you're asking

 

My friend asked me to see what all had to be done to install the bumper. He wasn't sure if it was a direct bolt on, or is some modification had to be done. So he asked me to see if anybody on here knew of a link to a detailed install of a 99-00 front end. And as to the attitude, I'm sick of noobs always adding useless info to posts. So stay out, if you don't have anything to add.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by undertheradar &raquo;</TD></TR><TR><TD CLASS="quote">Heres something useful.....you are an idiot and need to lay off the attitude when people are trying to help you.</TD></TR></TABLE>

I think you are the idiot. Most of the people that posted here, haven't helped me at all. Just made useless comments, just like you.
Please just help me out, or stay out......

 

https://honda-tech.com/zerothread?id=790135

https://honda-tech.com/zerothread?id=126733

https://honda-tech.com/zerothread?id=845158

https://honda-tech.com/zerothread?id=765821

https://honda-tech.com/zerothread?id=368131

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BauleyCivic &raquo;</TD></TR><TR><TD CLASS="quote">https://honda-tech.com/zerothread?id=790135</TD></TR></TABLE>

Thank you very much. I appreciate it.

 

Oooooo, BURN!