I was trying to replace the pcv valve on my b16a, but when I tried to pull the darn thing out it broke. The bottom half of the valve is still in the rubber grommet, plus in the attempt to remove the bottom half of the valve the top part of the grommet was torn off.Anybody have ideas on how to get that out and pur the new one in?




Modified by cvc323 at 12:57 AM 10/24/2004


Modified by cvc323 at 12:58 AM 10/24/2004

 

yeah first re-size the pict,lol

 

pic doesn't work

 

sorry, posting another pic soon. any suggestions w/out the pic?

 

If you can't pull it out somehow, you could always drill it out.

 

Maybe try running a self tapping bolt into it and using it to pull it out. Don't forget a little lube.

 

hose it down with some WD-40, and buy a "pick" set (like mini screw drivers but with angled points) stick that down the hole and pull up.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by swanny &raquo;</TD></TR><TR><TD CLASS="quote">hose it down with some WD-40, and buy a "pick" set (like mini screw drivers but with angled points) stick that down the hole and pull up.</TD></TR></TABLE>