Recommended Vendor for rebuilt cylinder head?
#1
Honda-Tech Member
Thread Starter
Recommended Vendor for rebuilt cylinder head?
For transmissions I have seen lots of good things said about Syncrotech.com
For axle shafts people recommend Raxles.com
What about rebuilt cylinder heads is there a go to vendor?
For axle shafts people recommend Raxles.com
What about rebuilt cylinder heads is there a go to vendor?
#6
Honda-Tech Member
Thread Starter
Re: Recommended Vendor for rebuilt cylinder head?
4 Piston Racing web site looks like they do excellent work. I think it would be overkill for my project. I am not building a race car.
#7
Re: Recommended Vendor for rebuilt cylinder head?
Local machine shop is the best bet, if you have a head already. It can get expensive depending on the shop and the work.
My D16A6 head w/ heavy carbon deposits and 280K miles cost about 350 to be tanked/cleaned and have new seats and valve lapping done. Came back looking like new.
My D16A6 head w/ heavy carbon deposits and 280K miles cost about 350 to be tanked/cleaned and have new seats and valve lapping done. Came back looking like new.
Thread
Thread Starter
Forum
Replies
Last Post
dpine
Engine Machining & Assembly
5
01-31-2019 10:47 PM
JerseySiPOS
All Motor / Naturally Aspirated
5
06-03-2011 02:26 PM
SoCaLNaTIvE
All Motor / Naturally Aspirated
3
04-24-2005 09:21 AM