Nov FS Thread
#1
Moderator
Thread Starter
Nov FS Thread
Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD
1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.
We will delete any BS we feel does not belong in here
Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.
From this point on, 3-7-2012, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings
EVERYTHING HAS TO HAVE PICS NO exceptions
1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.
We will delete any BS we feel does not belong in here
Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.
From this point on, 3-7-2012, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings
EVERYTHING HAS TO HAVE PICS NO exceptions
#2
Honda-Tech Member
iTrader: (1)
Bogart Fly Lites 13x8 front & 15x3.5 skinnies / MFactory PRO B16A2 Final Drive
Bogart Fly Lites 13x8 front with M/T 24.5x9x13 slicks and 15x3.5 rear skinnies with M&H 24x3.6x15 tires
Still a lot of meat on all tires - $1200 OBO or $875 without tires picked up! will include spacers and lug shanks as well
New MFactory MF-TRS-02B4P Honda B16A2 PRO 4.05 Final Drive got it WPC treated and never used it asking $600 OBO or trade for turbo parts (my loss is your gain...$899 retail + WPC treatment)
Still a lot of meat on all tires - $1200 OBO or $875 without tires picked up! will include spacers and lug shanks as well
New MFactory MF-TRS-02B4P Honda B16A2 PRO 4.05 Final Drive got it WPC treated and never used it asking $600 OBO or trade for turbo parts (my loss is your gain...$899 retail + WPC treatment)
#3
Re: Nov FS Thread
Kinsler 62mm magnesium body Kseries ITB's currently setup to use Kseries TPS. Can aso be setup to use other TPS versions. -8an fuel rail fittings. Does NOT include injectors. Excellent condition. $2100 Shipped. Buyer to pay Paypal fee or send money using gift option. Any questions please send PM or email tsx_k24@comcast.net
#4
Honda-Tech Member
Join Date: Nov 2011
Location: Nova Scotia, Canada
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Re: Nov FS Thread
AEM 30-6050 Series 2 EMS
Obd2B 00-01 Integra, 99-00 Civic or universal with custom harness.
Jumpers set for T1 Cam Trigger, I can change these back if needed.
Can get pictures for interested buyers.
850.00us buyer pays shipping.
Obd2B 00-01 Integra, 99-00 Civic or universal with custom harness.
Jumpers set for T1 Cam Trigger, I can change these back if needed.
Can get pictures for interested buyers.
850.00us buyer pays shipping.
#5
Honda-Tech Member
iTrader: (1)
Join Date: Aug 2006
Location: Ponca City, Oklahoma, United States
Posts: 405
Likes: 0
Received 5 Likes
on
4 Posts
Re: Nov FS Thread
Starting a new project so I need to get rid of some parts I no longer need.
All parts are used but in good condition. Paypal required unless local pickup, buyer pays PayPal fees. And sorry, no international.
Serious inquires only. PM me or for quicker response text 580-382-1661.
I am willing to do trades if its a part that I need for my new project. So let me know.
Mfactory Pro Series 4.05 final drive for B series GSR. - $300 shipped
Supertech 100 series flat face performance valves. These are NOT the stock replacement, they are the performance valves and have the logo at the top of the stem. Half are brand new in package the other half are used. - $150 shipped
Eagle LS length rods. Used for 2 seasons in an all motor application. Rod bolts torqued a few times when checking bearing clearance and twice for final assembly each season. - $200 shipped
AEBS sleeved GSR block w/caps. All motor 86mm bore, needs hone. Pistons to match can be included for extra cost, listed below. Block once was turbo, so it had o-ring grooves. Copper rings were pressed in and smoothed out to fill grooves. - $600 + shipping. Local pickup preferred, will drive to surrounding areas or meet halfway to deliver.
86mm Supertech 13.5:1 compression pistons. One cylinder had some detonation and resulted in some marks on the piston. I will sell the pistons by themselves or with the block. Comes with wrist pins. - $165 or $140 w/block
Competition Clutch Twin Disc. Good condition, came off running car. Missing one bolt, can be purchased at a hardware store. M8x1.25x45 Was going to sell my spec twin disc clutch, but it needed a new flywheel. I figure it would be easier to sell the CC twin and buy the flywheel and use the Spec. However, if you would rather have the spec clutch, Ill sell it for 500 + shipping. Otherwise the CC twin disc clutch - $750 + shipping
All parts are used but in good condition. Paypal required unless local pickup, buyer pays PayPal fees. And sorry, no international.
Serious inquires only. PM me or for quicker response text 580-382-1661.
I am willing to do trades if its a part that I need for my new project. So let me know.
Mfactory Pro Series 4.05 final drive for B series GSR. - $300 shipped
Supertech 100 series flat face performance valves. These are NOT the stock replacement, they are the performance valves and have the logo at the top of the stem. Half are brand new in package the other half are used. - $150 shipped
Eagle LS length rods. Used for 2 seasons in an all motor application. Rod bolts torqued a few times when checking bearing clearance and twice for final assembly each season. - $200 shipped
AEBS sleeved GSR block w/caps. All motor 86mm bore, needs hone. Pistons to match can be included for extra cost, listed below. Block once was turbo, so it had o-ring grooves. Copper rings were pressed in and smoothed out to fill grooves. - $600 + shipping. Local pickup preferred, will drive to surrounding areas or meet halfway to deliver.
86mm Supertech 13.5:1 compression pistons. One cylinder had some detonation and resulted in some marks on the piston. I will sell the pistons by themselves or with the block. Comes with wrist pins. - $165 or $140 w/block
Competition Clutch Twin Disc. Good condition, came off running car. Missing one bolt, can be purchased at a hardware store. M8x1.25x45 Was going to sell my spec twin disc clutch, but it needed a new flywheel. I figure it would be easier to sell the CC twin and buy the flywheel and use the Spec. However, if you would rather have the spec clutch, Ill sell it for 500 + shipping. Otherwise the CC twin disc clutch - $750 + shipping
#7
Honda-Tech Member
Re: Nov FS Thread
*Hondata injector driver: $350
Used for 1 dyno session, 4 track outings.
Price includes shipping to the 48
706-346-6024
Injector driver was literally one of the first public units to be used on the track. SN: #9
It has worked flawlessly and very easy to setup. I set it up in 5 minutes after wiring it up. Anyone can add this to their existing tune with very little adjustment! It actually will work without even touching it but minor adjustments make it work the best.
*Selling my entire ignition system. This system has performed flawlessly for me at 950-1000hp. I have not had an ignition breakup in probably 5-6 years.
MSD Digital 6+ 6520: $225 Shipped
MSD HVC II Coil 8253: $125 Shipped
Both MSD Components as Bundle: $325 Shipped
*OBD1 B Vtec Dizzy with MSD Cap and spare MSD Cap: $125 Shipped
setup for external coil currently. It was my spare dizzy. Getting rid of all of my distributor based parts.
$125 Shipped
PayPal add 3% or send as personal payment. I have plenty of people that can vouch for my integrity.
Used for 1 dyno session, 4 track outings.
Price includes shipping to the 48
706-346-6024
Injector driver was literally one of the first public units to be used on the track. SN: #9
It has worked flawlessly and very easy to setup. I set it up in 5 minutes after wiring it up. Anyone can add this to their existing tune with very little adjustment! It actually will work without even touching it but minor adjustments make it work the best.
*Selling my entire ignition system. This system has performed flawlessly for me at 950-1000hp. I have not had an ignition breakup in probably 5-6 years.
MSD Digital 6+ 6520: $225 Shipped
MSD HVC II Coil 8253: $125 Shipped
Both MSD Components as Bundle: $325 Shipped
*OBD1 B Vtec Dizzy with MSD Cap and spare MSD Cap: $125 Shipped
setup for external coil currently. It was my spare dizzy. Getting rid of all of my distributor based parts.
$125 Shipped
PayPal add 3% or send as personal payment. I have plenty of people that can vouch for my integrity.
Last edited by SPOOLINmatt; 12-05-2016 at 03:55 AM.
Trending Topics
#9
Re: Nov FS Thread
Located in Northern Virginia, Prices include shipping
PM or txt me 757-377-6541
Xcessive 8 injector 58mm intake w/ both fuel rails & 4bar MAP *NO INJECTORS INCLUDED*
$825
*NEW* Treblic Tuned t4 sidewinder manifold w/ 60mm wastegate flange
$950
BWR K-Series T4 Twin Scroll Turbo Manifold w/ twin 44mm wastegate flanges
$825
*NEW* Borg Warner s366 turbo divided t4 .91ar includes oil feed and return lines
$625
*NEW* Treadstone 4.5" 1000hp intercooler
$325
AEM Series 2 K series 30-6030
$925
PM or txt me 757-377-6541
Xcessive 8 injector 58mm intake w/ both fuel rails & 4bar MAP *NO INJECTORS INCLUDED*
$825
*NEW* Treblic Tuned t4 sidewinder manifold w/ 60mm wastegate flange
$950
BWR K-Series T4 Twin Scroll Turbo Manifold w/ twin 44mm wastegate flanges
$825
*NEW* Borg Warner s366 turbo divided t4 .91ar includes oil feed and return lines
$625
*NEW* Treadstone 4.5" 1000hp intercooler
$325
AEM Series 2 K series 30-6030
$925
Last edited by jskillzva; 12-04-2016 at 10:42 AM.
Thread
Thread Starter
Forum
Replies
Last Post