lost my burn settings ie chip start ect
Thread Starter
Junior Member
Joined: Oct 2007
Posts: 239
Likes: 2
From: San Clemente, CA, USA
lost my burn settings ie chip start ect
lost my tech files where i had my burn settings saved for a SST27SF512 i pulled them off the net off someone but don remember who tried pgmfi no luck heres the settings i need:
chip start______
chip end_______
buffer start _____
buffer end______
file offset_______
one of the settings i remember will be all FFFF and one will have an 8 in it i just don remember thank you all who have taken a look
chip start______
chip end_______
buffer start _____
buffer end______
file offset_______
one of the settings i remember will be all FFFF and one will have an 8 in it i just don remember thank you all who have taken a look
Honda-Tech Member
Joined: Oct 2002
Posts: 5,152
Likes: 24
From: chicago burbs, Il, USA
chip start address - 08000
chip end address - 00ffff
buffer start address - 000000
buffer end address - 007fff
file offset - no idea, burn1 does not use that. I'd guess 000000 since there should be no offset since you're addressing the location directly with the 256 bytes of data.
chip end address - 00ffff
buffer start address - 000000
buffer end address - 007fff
file offset - no idea, burn1 does not use that. I'd guess 000000 since there should be no offset since you're addressing the location directly with the 256 bytes of data.
Thread
Thread Starter
Forum
Replies
Last Post
