*****Parts for Sale: Toda Fightex, Nuspeed, Apexi, OEM, Aftermarket*******
#1
Member
Thread Starter
Join Date: Dec 2002
Location: Midwest, USA
Posts: 2,497
Likes: 0
Received 0 Likes
on
0 Posts
*****Parts for Sale: Toda Fightex, Nuspeed, Apexi, OEM, Aftermarket*******
Please check back. I will add more parts and update with pictures. Low ball will be ignore. Bump is mandatory if you look
2.25" Thermal R&D Downpipe back for 96+ hatch. Tip Painted black, no cat, 2 ~15 inches resonators. Good condition. I am going 3" 250
They look like this but black tip. These aren't my picture..barrowed from another H-T user. I will take down...just using temp this week.
Clusters, EG instrument panel and EK fog cover (only one side..I don't know what the hell happened to the other one ) Best offer
GSR Manifold. What you see is what you get. 50
94 LS Engine Wiring Harness Uncut best offer
Golden Eagle Godzilla Block:
-B16 block, currently at 83.5mm. Includes the following: complete block minus piston/rod assembly and oil pan. Other than that it is complete
-needs to be bore and hone to 84mm for the next built and then can be build at least 2 more times. (Max recommended for boost application is 85mm and 86mm for NA/nitrous)
-might want to resurface the deck while you are at the machine shop too.
-very good condition
B16a Head: parts below are slightly used
-JG Valves (black nitride and flat face for slightly higher compression)
-JG dual springs and titanium retainers
-light port on intake side (might want to port the exhaust to finish but okay as is)
-LMAs, rockers, OEM keepers, etc are all included to complete the head.
-would recommend getting new valve seals before assembling
-cam/gear and intake manifold are not included
-ITR valve cover (cut for cam gear)
-see pictures, very clean... what you see is what you get!!
It doesn't take much more time and money to finish the motor if you know what you are doing. My set prices are as follows:
BLOCK: $800 FIRM
HEAD: $700 FIRM
EVERYTHING FOR $1400 FIRM
If you want me to finish the motor for you, that is an option too. Please PM me.
FIRM means no negotiating.
------------------------------------------------------------------------------------------------
B16 Eagle Rods w/ arp bolts. Gently used, very good condition SOLD TO Ak_ef9
GSR polished by hand and buffer wheel with 85-90% BFG g-force sport 195/55/15.
SOLD to Pandahatch93
60mm Apexi N1 Catback for DC SOLD to ghuynh
Built Bottem End B18A motor. SOLD to ericrx_88
Toda Fightex FS coilover...very good condition. Front 10K-160 - Rear 8K-160. ITR rear lca can included. KEEPING IT>>>>NO LONGER FOR SALE
Nuspeed Rear Upper Tie Bar. Fit my DC4 Integra perfect. Sold to tunergsr32
17" Team Dynamic Wheels. Tires need replace SOLD to VN712
<FONT COLOR="blue"> <FONT SIZE="4">
Will Trade for:
-24" slick
-15" or 16" rims. No rota or oem </FONT> </FONT>
Modified by ProJectCvic at 11:11 AM 4/6/2007
Modified by ProJectCvic at 1:28 AM 4/10/2007
Modified by ProJectCvic at 1:47 PM 4/13/2007
Modified by ProJectCvic at 1:48 PM 4/13/2007
Modified by ProJectCvic at 1:48 PM 4/13/2007
Modified by ProJectCvic at 11:54 PM 6/26/2007
#2
Member
Thread Starter
Join Date: Dec 2002
Location: Midwest, USA
Posts: 2,497
Likes: 0
Received 0 Likes
on
0 Posts
Re: *****Parts for Sale: Toda Fightex, Nuspeed, Apexi, OEM, Aftermarket******* (ProJectCvic)
I am will be done with finals this week. Will post better and actual pictures beginning of next week.
#6
Member
Thread Starter
Join Date: Dec 2002
Location: Midwest, USA
Posts: 2,497
Likes: 0
Received 0 Likes
on
0 Posts
Re: (B20ZLS)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B20ZLS »</TD></TR><TR><TD CLASS="quote">bump for sweet looking rims and awesome parts</TD></TR></TABLE>
that is pretty sweet
that is pretty sweet
Trending Topics
#8
Honda-Tech Member
Join Date: Aug 2004
Location: 6feetdeep, CA, united states
Posts: 1,638
Likes: 0
Received 0 Likes
on
0 Posts
Re: *****Parts for Sale: Toda Fightex, Nuspeed, Apexi, OEM, Aftermarket******* (ProJectCvic)
bump for a nice set of coilovers that you don't see everyday
#15
Member
Thread Starter
Join Date: Dec 2002
Location: Midwest, USA
Posts: 2,497
Likes: 0
Received 0 Likes
on
0 Posts
Re: (tunergsr32)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cuban »</TD></TR><TR><TD CLASS="quote">nice leg in cluster shot</TD></TR></TABLE>
Oh YAHHH!!!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tunergsr32 »</TD></TR><TR><TD CLASS="quote">Neuspeed bar pending to me! What year did the N-1 come off of?</TD></TR></TABLE>
PM!
Thanks for all the bump while I was gone
Oh YAHHH!!!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tunergsr32 »</TD></TR><TR><TD CLASS="quote">Neuspeed bar pending to me! What year did the N-1 come off of?</TD></TR></TABLE>
PM!
Thanks for all the bump while I was gone
#17
Member
Thread Starter
Join Date: Dec 2002
Location: Midwest, USA
Posts: 2,497
Likes: 0
Received 0 Likes
on
0 Posts
Re: *****Parts for Sale: Toda Fightex, Nuspeed, Apexi, OEM, Aftermarket******* (ProJectCvic)
<FONT COLOR="red"> <FONT SIZE="4">
delete</FONT> </FONT>
Modified by ProJectCvic at 12:42 AM 1/29/2007
Modified by ProJectCvic at 7:49 PM 3/4/2007
delete</FONT> </FONT>
Modified by ProJectCvic at 12:42 AM 1/29/2007
Modified by ProJectCvic at 7:49 PM 3/4/2007
#19
Member
Thread Starter
Join Date: Dec 2002
Location: Midwest, USA
Posts: 2,497
Likes: 0
Received 0 Likes
on
0 Posts
Re: *****Parts for Sale: Toda Fightex, Nuspeed, Apexi, OEM, Aftermarket******* (Mr.OB*GYN_Rhett)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr.OB*GYN_Rhett »</TD></TR><TR><TD CLASS="quote">cannot beleive those todas arent gone </TD></TR></TABLE>
yea...all bark and no bite. I am going to take the figthex off the market at the end of this week. It'll be somewhat of a waste but I'll daily it
yea...all bark and no bite. I am going to take the figthex off the market at the end of this week. It'll be somewhat of a waste but I'll daily it
#20
Honda-Tech Member
iTrader: (2)
Join Date: Dec 2003
Location: The heart of cat bong
Posts: 24,554
Likes: 0
Received 0 Likes
on
0 Posts
Re: *****Parts for Sale: Toda Fightex, Nuspeed, Apexi, OEM, Aftermarket******* (ProJectCvic)
haha dude i daily tein ra's with 12k/14k, never been tracked haha talk about a waste.
did you buy them brand new?
did you buy them brand new?
#21
Member
Thread Starter
Join Date: Dec 2002
Location: Midwest, USA
Posts: 2,497
Likes: 0
Received 0 Likes
on
0 Posts
Re: *****Parts for Sale: Toda Fightex, Nuspeed, Apexi, OEM, Aftermarket******* (Mr.OB*GYN_Rhett)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr.OB*GYN_Rhett »</TD></TR><TR><TD CLASS="quote">haha dude i daily tein ra's with 12k/14k, never been tracked haha talk about a waste.
did you buy them brand new? </TD></TR></TABLE>
Wow..with that spring rate, it is even tolerable on the street? You like it rough don't you Pretty close to new.
did you buy them brand new? </TD></TR></TABLE>
Wow..with that spring rate, it is even tolerable on the street? You like it rough don't you Pretty close to new.
#22
Honda-Tech Member
iTrader: (2)
Join Date: Dec 2003
Location: The heart of cat bong
Posts: 24,554
Likes: 0
Received 0 Likes
on
0 Posts
Re: *****Parts for Sale: Toda Fightex, Nuspeed, Apexi, OEM, Aftermarket******* (ProJectCvic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ProJectCvic »</TD></TR><TR><TD CLASS="quote">
Wow..with that spring rate, it is even tolerable on the street? You like it rough don't you Pretty close to new.</TD></TR></TABLE>
actually very much so, with proper valving and the like a high spring rate can actually feel very soft. i mean when i hit something deep or blunt on the street, it will stiffen up real quick. and yeah i do like it rough!
Wow..with that spring rate, it is even tolerable on the street? You like it rough don't you Pretty close to new.</TD></TR></TABLE>
actually very much so, with proper valving and the like a high spring rate can actually feel very soft. i mean when i hit something deep or blunt on the street, it will stiffen up real quick. and yeah i do like it rough!
#24
Member
Thread Starter
Join Date: Dec 2002
Location: Midwest, USA
Posts: 2,497
Likes: 0
Received 0 Likes
on
0 Posts
Re: *****Parts for Sale: Toda Fightex, Nuspeed, Apexi, OEM, Aftermarket******* (Mr.OB*GYN_Rhett)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr.OB*GYN_Rhett »</TD></TR><TR><TD CLASS="quote">actually very much so, with proper valving and the like a high spring rate can actually feel very soft. i mean when i hit something deep or blunt on the street, it will stiffen up real quick. and yeah i do like it rough! </TD></TR></TABLE>
I understand what you mean. They're stiff. Night bump.
I understand what you mean. They're stiff. Night bump.