|
*****Parts for Sale: Toda Fightex, Nuspeed, Apexi, OEM, Aftermarket*******
http://www.enhancedhealing.com/image...iness_logo.jpg
Please check back. I will add more parts and update with pictures. Low ball will be ignore. Bump is mandatory if you look https://honda-tech.com/forums/images/smilies/emwink.gif 2.25" Thermal R&D Downpipe back for 96+ hatch. Tip Painted black, no cat, 2 ~15 inches resonators. Good condition. I am going 3" 250 They look like this but black tip. These aren't my picture..barrowed from another H-T user. I will take down...just using temp this week. http://www.we-todd-did-racing.com/we...ZkMzF5NTQx.jpg Clusters, EG instrument panel and EK fog cover (only one side..I don't know what the hell happened to the other one https://honda-tech.com/forums/images...s/emhammer.gif) Best offer http://www.imagestation.com/picture/...c/eae32aef.jpg http://www.imagestation.com/picture/...1/eae32995.jpg GSR Manifold. What you see is what you get. 50 http://www.imagestation.com/picture/...7/ead1f7dd.jpg http://www.imagestation.com/picture/...d/ead1f638.jpg 94 LS Engine Wiring Harness Uncut best offer Golden Eagle Godzilla Block: -B16 block, currently at 83.5mm. Includes the following: complete block minus piston/rod assembly and oil pan. Other than that it is complete -needs to be bore and hone to 84mm for the next built and then can be build at least 2 more times. (Max recommended for boost application is 85mm and 86mm for NA/nitrous) -might want to resurface the deck while you are at the machine shop too. -very good condition http://www.imagestation.com/picture/...a/e91352a2.jpg http://www.imagestation.com/picture/...0/e9135050.jpg B16a Head: parts below are slightly used -JG Valves (black nitride and flat face for slightly higher compression) -JG dual springs and titanium retainers -light port on intake side (might want to port the exhaust to finish but okay as is) -LMAs, rockers, OEM keepers, etc are all included to complete the head. -would recommend getting new valve seals before assembling -cam/gear and intake manifold are not included -ITR valve cover (cut for cam gear) -see pictures, very clean... what you see is what you get!! http://www.imagestation.com/picture/...8/e9134e55.jpg http://www.imagestation.com/picture/...b/e9134e41.jpg http://www.imagestation.com/picture/...8/e9134e2e.jpg http://www.imagestation.com/picture/...9/e9134e1f.jpg http://www.imagestation.com/picture/...3/e9134e1a.jpg http://www.imagestation.com/picture/...6/e9134e0f.jpg http://www.imagestation.com/picture/...3/e9134e04.jpg It doesn't take much more time and money to finish the motor if you know what you are doing. My set prices are as follows: BLOCK: $800 FIRM HEAD: $700 FIRM EVERYTHING FOR $1400 FIRM If you want me to finish the motor for you, that is an option too. Please PM me. FIRM means no negotiating. ------------------------------------------------------------------------------------------------ B16 Eagle Rods w/ arp bolts. Gently used, very good condition SOLD TO Ak_ef9 GSR polished by hand and buffer wheel with 85-90% BFG g-force sport 195/55/15. SOLD to Pandahatch93 60mm Apexi N1 Catback for DC SOLD to ghuynh Built Bottem End B18A motor. SOLD to ericrx_88 Toda Fightex FS coilover...very good condition. Front 10K-160 - Rear 8K-160. ITR rear lca can included. KEEPING IT>>>>NO LONGER FOR SALE Nuspeed Rear Upper Tie Bar. Fit my DC4 Integra perfect. Sold to tunergsr32 17" Team Dynamic Wheels. Tires need replace SOLD to VN712 <FONT COLOR="blue"> <FONT SIZE="4"> Will Trade for: -24" slick -15" or 16" rims. No rota or oem </FONT> </FONT> Modified by ProJectCvic at 11:11 AM 4/6/2007 Modified by ProJectCvic at 1:28 AM 4/10/2007 Modified by ProJectCvic at 1:47 PM 4/13/2007 Modified by ProJectCvic at 1:48 PM 4/13/2007 Modified by ProJectCvic at 1:48 PM 4/13/2007 Modified by ProJectCvic at 11:54 PM 6/26/2007 |
Re: *****Parts for Sale: Toda Fightex, Nuspeed, Apexi, OEM, Aftermarket******* (ProJectCvic)
I am will be done with finals this week. Will post better and actual pictures beginning of next week. https://honda-tech.com/forums/images/smilies/emthup.gif
|
Re: *****Parts for Sale: Toda Fightex, Nuspeed, Apexi, OEM, Aftermarket******* (ProJectCvic)
|
Re: *****Parts for Sale: Toda Fightex, Nuspeed, Apexi, OEM, Aftermarket******* (ProJectCvic)
|
bump for sweet looking rims and awesome parts
|
Re: (B20ZLS)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B20ZLS »</TD></TR><TR><TD CLASS="quote">bump for sweet looking rims and awesome parts</TD></TR></TABLE>
that is pretty sweet https://honda-tech.com/forums/images/smilies/emwink.gif |
Re: (ProJectCvic)
BUMP for some HIgh quality parts, wish i had the money... https://honda-tech.com/forums/images/smilies/emthup.gif
|
Re: *****Parts for Sale: Toda Fightex, Nuspeed, Apexi, OEM, Aftermarket******* (ProJectCvic)
bump for a nice set of coilovers that you don't see everyday
|
Re: *****Parts for Sale: Toda Fightex, Nuspeed, Apexi, OEM, Aftermarket******* (Axel Foley)
Bump for buying my radiator https://honda-tech.com/forums/images/smilies/emthup.gif
|
Re: *****Parts for Sale: Toda Fightex, Nuspeed, Apexi, OEM, Aftermarket******* (ProJectCvic)
still good ish https://honda-tech.com/forums/images/smilies/emthup.gif
|
Re: *****Parts for Sale: Toda Fightex, Nuspeed, Apexi, OEM, Aftermarket******* (Mr.OB*GYN_Rhett)
I looked so I am required to bump https://honda-tech.com/forums/images/smilies/emthup.gif
|
Re: *****Parts for Sale: Toda Fightex, Nuspeed, Apexi, OEM, Aftermarket******* (ProJectCvic)
TTT!!!!
Tristan 00-0503 |
Re: *****Parts for Sale: Toda Fightex, Nuspeed, Apexi, OEM, Aftermarket******* (SleeperR)
nice leg in cluster shot
|
Neuspeed bar pending to me! What year did the N-1 come off of?
|
Re: (tunergsr32)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cuban »</TD></TR><TR><TD CLASS="quote">nice leg in cluster shot</TD></TR></TABLE>
Oh YAHHH!!! <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tunergsr32 »</TD></TR><TR><TD CLASS="quote">Neuspeed bar pending to me! What year did the N-1 come off of?</TD></TR></TABLE> PM! Thanks for all the bump while I was gone https://honda-tech.com/forums/images...es/emsmile.gif https://honda-tech.com/forums/images/smilies/emthup.gif https://honda-tech.com/forums/images/smilies/emthup.gif |
Re: *****Parts for Sale: Toda Fightex, Nuspeed, Apexi, OEM, Aftermarket******* (ProJectCvic)
update with more pictures
|
Re: *****Parts for Sale: Toda Fightex, Nuspeed, Apexi, OEM, Aftermarket******* (ProJectCvic)
<FONT COLOR="red"> <FONT SIZE="4">
delete</FONT> </FONT> Modified by ProJectCvic at 12:42 AM 1/29/2007 Modified by ProJectCvic at 7:49 PM 3/4/2007 |
Re: *****Parts for Sale: Toda Fightex, Nuspeed, Apexi, OEM, Aftermarket******* (ProJectCvic)
cannot beleive those todas arent gone https://honda-tech.com/forums/images...s/emthdown.gif
|
Re: *****Parts for Sale: Toda Fightex, Nuspeed, Apexi, OEM, Aftermarket******* (Mr.OB*GYN_Rhett)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr.OB*GYN_Rhett »</TD></TR><TR><TD CLASS="quote">cannot beleive those todas arent gone https://honda-tech.com/forums/images...s/emthdown.gif </TD></TR></TABLE>
yea...all bark and no bite. I am going to take the figthex off the market at the end of this week. It'll be somewhat of a waste but I'll daily it https://honda-tech.com/forums/images...s/emsmileo.gif https://honda-tech.com/forums/images...s/emsmilep.gif |
Re: *****Parts for Sale: Toda Fightex, Nuspeed, Apexi, OEM, Aftermarket******* (ProJectCvic)
haha dude i daily tein ra's with 12k/14k, never been tracked haha talk about a waste.
did you buy them brand new? https://honda-tech.com/forums/images/smilies/emthup.gif |
Re: *****Parts for Sale: Toda Fightex, Nuspeed, Apexi, OEM, Aftermarket******* (Mr.OB*GYN_Rhett)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr.OB*GYN_Rhett »</TD></TR><TR><TD CLASS="quote">haha dude i daily tein ra's with 12k/14k, never been tracked haha talk about a waste.
did you buy them brand new? https://honda-tech.com/forums/images/smilies/emthup.gif </TD></TR></TABLE> Wow..with that spring rate, it is even tolerable on the street? You like it rough don't you https://honda-tech.com/forums/images...s/emsmilep.gif Pretty close to new. |
Re: *****Parts for Sale: Toda Fightex, Nuspeed, Apexi, OEM, Aftermarket******* (ProJectCvic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ProJectCvic »</TD></TR><TR><TD CLASS="quote">
Wow..with that spring rate, it is even tolerable on the street? You like it rough don't you https://honda-tech.com/forums/images...s/emsmilep.gif Pretty close to new.</TD></TR></TABLE> actually very much so, with proper valving and the like a high spring rate can actually feel very soft. i mean when i hit something deep or blunt on the street, it will stiffen up real quick. and yeah i do like it rough! https://honda-tech.com/forums/images/smilies/emthup.gif |
bump for some bling-ing ass shits!!!
|
Re: *****Parts for Sale: Toda Fightex, Nuspeed, Apexi, OEM, Aftermarket******* (Mr.OB*GYN_Rhett)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr.OB*GYN_Rhett »</TD></TR><TR><TD CLASS="quote">actually very much so, with proper valving and the like a high spring rate can actually feel very soft. i mean when i hit something deep or blunt on the street, it will stiffen up real quick. and yeah i do like it rough! https://honda-tech.com/forums/images/smilies/emthup.gif </TD></TR></TABLE>
I understand what you mean. They're stiff. Night bump. |
Re: *****Parts for Sale: Toda Fightex, Nuspeed, Apexi, OEM, Aftermarket******* (ProJectCvic)
Added DC jdm fender liners today.
|
| All times are GMT -8. The time now is 01:29 PM. |
© 2024 MH Sub I, LLC dba Internet Brands