Eagle ESP Armor on rods & cranks - Real Street Performance
08-30-2013, 09:50 AM
#1
Thread Starter
Join Date: Oct 2009
Location: Longwood, FL
Posts: 1,936
Likes: 0
Received 0 Likes
on
0 Posts
Eagle ESP Armor on rods & cranks - Real Street Performance
Add this option to your Eagle products.
*Reduced friction.
*Lower oil heating times.
*Increased bearing life.
*Increased hp gains.
ESP Armor is a revolutionary new surface finishing process developed exclusively by Eagle Specialty Products, Inc. The exact process is a closely guarded secret, but you can know that it does not use any chemicals or electrolysis-type processes. It is also not a coating.
*Reduced friction.
*Lower oil heating times.
*Increased bearing life.
*Increased hp gains.
ESP Armor is a revolutionary new surface finishing process developed exclusively by Eagle Specialty Products, Inc. The exact process is a closely guarded secret, but you can know that it does not use any chemicals or electrolysis-type processes. It is also not a coating.
09-03-2013, 12:30 AM
#3
Honda-Tech Member
Re: Eagle ESP Armor on rods & cranks - Real Street Performance
Is this similar to a WPC process? Kinda of like a micro fine shotpeening process? Or is it jst a coating?
09-03-2013, 12:33 PM
#4
Thread Starter
Join Date: Oct 2009
Location: Longwood, FL
Posts: 1,936
Likes: 0
Received 0 Likes
on
0 Posts
Re: Eagle ESP Armor on rods & cranks - Real Street Performance
The details of the process are proprietary, but I can tell you it's not a coating. I will contact Eagle to see if I can get you some more information or a link to the press release.
09-05-2013, 05:44 AM
#5
Thread Starter
Join Date: Oct 2009
Location: Longwood, FL
Posts: 1,936
Likes: 0
Received 0 Likes
on
0 Posts
Re: Eagle ESP Armor on rods & cranks - Real Street Performance
Here is a link to more info:
http://www.eaglerod.com/index.php?op...id=7&Itemid=27
This process strengthens the part by reducing microscopic stress risers in the surface of the part.
http://www.eaglerod.com/index.php?op...id=7&Itemid=27
This process strengthens the part by reducing microscopic stress risers in the surface of the part.
Thread
Thread Starter
Forum
Replies
Last Post