1998 Honda Prelude bb6 Fully Built T3/T4 308 whp 300 trq Lots of Goodies!!!
#1
Honda-Tech Member
Thread Starter
1998 Honda Prelude bb6 Fully Built T3/T4 308 whp 300 trq Lots of Goodies!!!
-1998 Honda Prelude Base Model 5 spd-
- 150k on chassis
- 6k on Fresh Build: Done by Buds Machine shop
- Every part was put on by Doug Zeller a well know Honda Tech.
Engine:
6k miles on rebuild and runs flawless was tuned at speedfactory and made 308 whp and 304 wtrq at 18 psi.
- H22A4 Rebuilt with Darton Closed Deck Sleeves
- JE pistons current compression of 9.8-1
- Eagle rods
- Balanced
- Put together by Buds Machine shop
- Head has a full PnP by Buds
- Stock valvetrain and cams
- ARP head studs
- 770cc injectors
- Transmission is a JDM H22A LSD M2B4 purchased from HMO
- Stage 3 ACT clutch kit and ACT streetlite flywheel 10 lb
- Turbonetics Turbo Kit T3/T4 modified slightly and color matched.
- Complete line of Autometer gauges and wideband
- Turbo Timer
- Crome Tuned Runs daily at 18 psi
Brakes/Suspension: within 6k miles
- Koni Yellow Shocks with Neuspeed sport springs
- New Brake Rotors, pads, SS brake lines,
- Neuspeed front upper sway bar
- Cusco rear upper strut bar
- Suspension Techniques lower sway bar kit FRONT and REAR
- Full Energy Suspension Bushings all around
- Explicit Speed Performance Traction Bar System
- 17" Enkei Botex Wheels/ Federal tires
Exhaust:
- Highflow cat 2 1/4"
- Greddy SP exhaust system
WARNING EXHAUST SYSTEM IS HOLDING CAR BACK! LOL
Car has 500 whp in it... Slap on a 3" exhaust system, cat, downpipe and your at 400 whp.
Car runs flawless and all parts are like new within 6k miles. Full on paper reciepts... and documentation...
$13,000.00 The rebuild and parts have costed easily that... Clean title and a well taken cared of car.
Location Olympia, WA
PM with interests
- 150k on chassis
- 6k on Fresh Build: Done by Buds Machine shop
- Every part was put on by Doug Zeller a well know Honda Tech.
Engine:
6k miles on rebuild and runs flawless was tuned at speedfactory and made 308 whp and 304 wtrq at 18 psi.
- H22A4 Rebuilt with Darton Closed Deck Sleeves
- JE pistons current compression of 9.8-1
- Eagle rods
- Balanced
- Put together by Buds Machine shop
- Head has a full PnP by Buds
- Stock valvetrain and cams
- ARP head studs
- 770cc injectors
- Transmission is a JDM H22A LSD M2B4 purchased from HMO
- Stage 3 ACT clutch kit and ACT streetlite flywheel 10 lb
- Turbonetics Turbo Kit T3/T4 modified slightly and color matched.
- Complete line of Autometer gauges and wideband
- Turbo Timer
- Crome Tuned Runs daily at 18 psi
Brakes/Suspension: within 6k miles
- Koni Yellow Shocks with Neuspeed sport springs
- New Brake Rotors, pads, SS brake lines,
- Neuspeed front upper sway bar
- Cusco rear upper strut bar
- Suspension Techniques lower sway bar kit FRONT and REAR
- Full Energy Suspension Bushings all around
- Explicit Speed Performance Traction Bar System
- 17" Enkei Botex Wheels/ Federal tires
Exhaust:
- Highflow cat 2 1/4"
- Greddy SP exhaust system
WARNING EXHAUST SYSTEM IS HOLDING CAR BACK! LOL
Car has 500 whp in it... Slap on a 3" exhaust system, cat, downpipe and your at 400 whp.
Car runs flawless and all parts are like new within 6k miles. Full on paper reciepts... and documentation...
$13,000.00 The rebuild and parts have costed easily that... Clean title and a well taken cared of car.
Location Olympia, WA
PM with interests
Thread
Thread Starter
Forum
Replies
Last Post