K24 problem
#1
K24 problem
Hello I recently swapped my eg to a k24a 3 lob. I got a 6speed tranny ported rbc a throttle body off of a k20z1 1320 header with 3” full exhaust. I’ve been having trouble trying to get the car running right. I’m running a kpro v4. Car starts but injectors are reading to 12.50ish on idle and on my bros its at 2.50ish. Tps is reading 40 and 61.1 at full throttle. Somethings throwing off my injectors and car is running to rich and smokes black when it’s on.
So far I’ve swapped tps, map, injectors to 550cc and 310cc, engine harness to a rywire ecu spark plugs, plugs grounds and injectors are still reading high. Car drives but bugs out and if I try to give it more gas it cuts off.
Any help is appreciated thank you
So far I’ve swapped tps, map, injectors to 550cc and 310cc, engine harness to a rywire ecu spark plugs, plugs grounds and injectors are still reading high. Car drives but bugs out and if I try to give it more gas it cuts off.
Any help is appreciated thank you
Thread
Thread Starter
Forum
Replies
Last Post
Westrock2000
Forced Induction
8
11-09-2010 04:19 PM
yusoslo
Forced Induction
27
09-25-2004 07:41 PM