What a good price for a complete ls/vtec motor?
#1
New User
Thread Starter
Join Date: Sep 2001
Location: DuBois, PA, usa
Posts: 455
Likes: 0
Received 0 Likes
on
0 Posts
What a good price for a complete ls/vtec motor?
My car cought on fire and is a total loss so I have one I might be selling.
It only has 150 miles on it. The bottom end is a b18a and was just completly rebuid including polished crank, new factory bearings, rings, seals, head gasket, honed, arp head bolt . Everything, no corners cut.
The head has also been done with the same treatment. Its a gsr head. 2 valve guides replaced, all new seals, seats and valve where all done in standard 3 angle. It includes all sensors, dizzy, areoquip stainless lines, connectors, plugs for head, and a Tee manifold to distribuit oil to head + turbo, intake everything except exhaust manifold. It was a complete running ls/vtec/turbo set up that never seen more than 3 psi or over 100 miles.
It only has 150 miles on it. The bottom end is a b18a and was just completly rebuid including polished crank, new factory bearings, rings, seals, head gasket, honed, arp head bolt . Everything, no corners cut.
The head has also been done with the same treatment. Its a gsr head. 2 valve guides replaced, all new seals, seats and valve where all done in standard 3 angle. It includes all sensors, dizzy, areoquip stainless lines, connectors, plugs for head, and a Tee manifold to distribuit oil to head + turbo, intake everything except exhaust manifold. It was a complete running ls/vtec/turbo set up that never seen more than 3 psi or over 100 miles.
Thread
Thread Starter
Forum
Replies
Last Post