KNIVES

Ok h22 99 hatch with 17 inch wheels.......

I ran my car 4 times. 3 out of the 4 times I ran a 14.3+. Once spining to much and with the best being.

reaction 1.1231
60 ft 2.1775
330ft 6.0697
1/8E/T 9.2558
1000mph 90.11
1/4ET 14.3115
1/4 mph 95.83

Yes I know my reaction time loooks like **** and it is but it was my first time at the track. I'm going to run on race gas and run on bgf drag radials next sunday. What is the correct way to burn out? drop the clutch at high rpm's with e-brake? my rev limiter kicked in, and what air pressure should I run the drag radials on? I'm going to run them at 16 pounds, is that good? Thanks alot for any info you can give me. I'll post back my ET next week.

jsdxhatch

I'd say u post this in the drag racing forum....they have tons of knowledge about this stuff over there

good luck and watch those r/t's and 60 fts.

jsdxhatch

I'd say u post this in the drag racing forum....they have tons of knowledge about this stuff over there

good luck and watch those r/t's

Adam.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jsdxhatch &raquo;</TD></TR><TR><TD CLASS="quote">

good luck and watch those r/t's and 60 fts.</TD></TR></TABLE>

I'd say his 60 foot was damn good for a 2.17

Jason kiDD

Good times.. Where were you shifting at??

Pikachu

14's is about right for an h22 civic NA. Good times man.

KNIVES

shifting at 8,5000. I'm hoping for better times with the drag radials.

Adam.

:spits his drink out: 8500??!!

Jason kiDD

Yeah I was about to ask the same thing.. Have you done any head work?!

KNIVES

no head work just bad typeing skills

7,500 is where I shift at.

H22A1CivicEG

hey dude, sorry to post this here, but, did you ever fix the idle problem.. i really need help with mine, we were having the same problem..

KNIVES

yeah just got back from Peter Yen Racing and plugged in the chiped p28 he did for me. The car runs perfect...not sure why but it does. It ran ok with the non chiped p28 but it wouldn't be safe or fast but then I ran a p28 with a skunk2 program and it had the crazy ide too. But the PYR chiped p28 works just fine. Car pulls very hard in mid-range and told me if I wanted a differnt program he would chip it for free. Seeing as know it runs fine I don't think I will. Also my car would have really bad throttle responce. If I let of the gas just a sinch the car would bog. I was either moving faster or slower but the speed would jump up and down. That too is fixed. I'm very happy to have my car running well. Good luck with your ride.